Tank Lift Confusion??
#1
Tank Lift Confusion??
Ok... read all the posts on it but I dont get it.... I think I want to do the 3" lift on my 06' dyna. Has anyone done this peticular bike?? If so and it works can someone scan in the parts they made so I can cut my own?? Im at work now so I cant see the bike and I dont even know what size holes to drill... Any help is appreciated THANKS!!!
Rick
Rick
#3
RE: Tank Lift Confusion??
If your asking those questions then you didnt read all the posts so ill get them for you there is detailed info on how to make and install the tank lifts.
https://www.hdforums.com/m_311700/tm.htm
https://www.hdforums.com/m_363372/tm.htm
There is one more thread that I cant find ill look again later.
steve
https://www.hdforums.com/m_311700/tm.htm
https://www.hdforums.com/m_363372/tm.htm
There is one more thread that I cant find ill look again later.
steve
#4
RE: Tank Lift Confusion??
rickshog...Basically the metal piece you need is 1" wide 1/8" thick. Since I don't know if all of the tanks have the same mounting bolt size, I used the same size that originally mounted mine.. (I have a 2006 FXDI ).. I went to LOWES and bought a new pair about 1/2 " longer than the original. The reason I did that was since my new metal piece was straight not offset I needed to place two washers on each size of the bottom tank frame mount to take up the space that an offset piece of metal would normally occupy. The top mount (on Tank) didn't need the extra washers. The metal I used where just wall or shelf corner brackets that I bought at WALLY MART they had pre-drilled holes. I first used one bracket that had pre-drilled
holes spaced at 1 3/4" .. I just changed out those with a set that had 3" holes... worked great only had to move my throttle cables around a little for better clearance. I also rounded the ends with my grinder and painted them.. One problem I had was stupid me I had just filled my tank..... I emptied it out.. that was a pain... I cut the fuel line that ties the two sides together and put a longer one in to give me the 3" lift... between this post and my other one I think I pretty much covered it... I like the effect it gives the bike... I'd take some pics but my digtal camera bit the dust the other day....Oooooops..
holes spaced at 1 3/4" .. I just changed out those with a set that had 3" holes... worked great only had to move my throttle cables around a little for better clearance. I also rounded the ends with my grinder and painted them.. One problem I had was stupid me I had just filled my tank..... I emptied it out.. that was a pain... I cut the fuel line that ties the two sides together and put a longer one in to give me the 3" lift... between this post and my other one I think I pretty much covered it... I like the effect it gives the bike... I'd take some pics but my digtal camera bit the dust the other day....Oooooops..
#7
RE: Tank Lift Confusion??
intruder400ex and rudedog... Thanks.. Went to a HD Birthday party today a few friends seen my lift thought it looked great... a couple of guys that I didn't know said it looked cool... another guy said my fuel gauge will be f'cked up and another said it looked like a sportster... I think it looks way better than the original setup...
Trending Topics
#8
#10
Thread
Thread Starter
Forum
Replies
Last Post
AdrianVall
Want To Buy Motorcycles/Parts/Accessories
5
12-15-2009 05:49 AM