Relocate my blinkers from the stock location to underneath the auxiliary light bar? I just put on some 18 in apes, and I like the look of the blinkers underneath the auxiliary lights. And I havea 1995 fb.
How much do they bang you out for that one? I was hoping someone had a diff. company that makes it. Oh well, just gotta do a little research. Thanks for your help
I got a 5/16' 24 SS bolt and cut the head off. I then threaded the bolt into the lower screw hole on the front tins using blue loctight. You then can screw the signal light onto the bolt, again using blue loctight. I picked up a couple of chrome spacers from the dealership that goes between the tins and signal light to hide the stud. A few people have used SS nuts to keep everything in place, but then you see the nuts. I prefer the spacers myself. The blue loctight works good and they haven't come loose yet. Knock on wood.
I am in the process of doing the same thing. I put on 16" apes yesterday. I wont to relocate to undernieth my tri-bar. I dont wont to pay the HD rate so if there is an aftermarket brand that will work that would be great.
That is pretty much the same reason I started this post. HD sells isht that cost too much for what it is (sometimes). I wonder if there are ever any tech meeting for guys in the tri-state to help other noobs like me make some minor changes on the scoots.