21" laced front wheel is on my Super Glide - PICS
#1
01-10-2008 | 01:17 PM
Thread Starter
|
Outstanding HDF Member
21" laced front wheel is on my Super Glide - PICS
A new, self laced 21" wheel on my 06 Super Glide.
As always, would appreciate some feedback and welcome questions
[IMG]local://upfiles/23085/59C10732230F4BB6A22BF6C415F8C374.jpg[/IMG]
[IMG]local://upfiles/23085/0E48A1B27B234D3689B0E34ED41CAEEF.jpg[/IMG]
As always, would appreciate some feedback and welcome questions
[IMG]local://upfiles/23085/59C10732230F4BB6A22BF6C415F8C374.jpg[/IMG]
[IMG]local://upfiles/23085/0E48A1B27B234D3689B0E34ED41CAEEF.jpg[/IMG]
#4
01-10-2008 | 01:45 PM
Thread Starter
|
Outstanding HDF Member
RE: 21" laced front wheel is on my Super Glide - PICS
I just went with the OEM type Dunlop
Sorry Ventura Chop. I originally posted this in response to your post. i reread yours and I don't think I answered your question.
The tire that was on the bile is sold with the rest of the wheel.
I do still have a good OEM Bob 19" Dunlop tire, if thats what you are asking.
Sorry Ventura Chop. I originally posted this in response to your post. i reread yours and I don't think I answered your question.
The tire that was on the bile is sold with the rest of the wheel.
I do still have a good OEM Bob 19" Dunlop tire, if thats what you are asking.
#5
01-10-2008 | 01:46 PM
Ultimate HDF Member
#7
01-10-2008 | 01:57 PM
Road Master
Trending Topics
#8
01-10-2008 | 02:12 PM
Thread Starter
|
Outstanding HDF Member
RE: 21" laced front wheel is on my Super Glide - PICS
Here are the components I used and the cost. Alsohave listed a couple things I did to reduce cost.
Spokes 45-0607 22.99 J&P Cycles
21" Rim2000195 99.99J&P Cycles
Spare Dyna Hub 50.00 Forum Member
MH90-21Tirew/tube98.55Dealer
Lacing 0.00Did myself
Truing40.00Dealer
Tire mount and balance 40.00 Dealer
Instead of using my existing hub (which would have made my old wheel worthless and gave me down time of the bike), I found a forum member who had a bent rim. I purchased it for $50.00 with the intent of just using that hub on the new wheel build. (Make sure if you find a hub, you get one for the correct size axle). When the rim arrived, I discovered the tire and rotor were included and both in very good shape. I used the floating rotor on my bike. The rotor and hub cleaned up to look like new. I hope to sell my original rotor for about $25.00 and the tire for $25.00. I have already sold my take-off wheel for $150.00 plus shipping to a forum member. Using the hub from the purchased bent rim allowed me to recoop $150.00 to $200.00 of the cost making this a pretty reasonably priced mod. I laced the hub to teh rim myself, which saved even more money. I used the steps as outlined in the service manual.
Sold 19" wheel and tire -150.00 Forum member
Hope to sell rotor and tire - 50.00
which came with spare hub
Total out of pocket ended up being about $190.00 including shipping charges of parts.
Spokes 45-0607 22.99 J&P Cycles
21" Rim2000195 99.99J&P Cycles
Spare Dyna Hub 50.00 Forum Member
MH90-21Tirew/tube98.55Dealer
Lacing 0.00Did myself
Truing40.00Dealer
Tire mount and balance 40.00 Dealer
Instead of using my existing hub (which would have made my old wheel worthless and gave me down time of the bike), I found a forum member who had a bent rim. I purchased it for $50.00 with the intent of just using that hub on the new wheel build. (Make sure if you find a hub, you get one for the correct size axle). When the rim arrived, I discovered the tire and rotor were included and both in very good shape. I used the floating rotor on my bike. The rotor and hub cleaned up to look like new. I hope to sell my original rotor for about $25.00 and the tire for $25.00. I have already sold my take-off wheel for $150.00 plus shipping to a forum member. Using the hub from the purchased bent rim allowed me to recoop $150.00 to $200.00 of the cost making this a pretty reasonably priced mod. I laced the hub to teh rim myself, which saved even more money. I used the steps as outlined in the service manual.
Sold 19" wheel and tire -150.00 Forum member
Hope to sell rotor and tire - 50.00
which came with spare hub
Total out of pocket ended up being about $190.00 including shipping charges of parts.
#9
01-10-2008 | 02:14 PM
Thread Starter
|
Outstanding HDF Member
#10
01-10-2008 | 02:31 PM
muderator
RE: 21" laced front wheel is on my Super Glide - PICS
Nice job. A noticeable change in appearance.
Notice any change in handling and/or performance??
Which rotor are you selling John??
Part number??
I may be interested.
mud
Notice any change in handling and/or performance??
Which rotor are you selling John??
Part number??
I may be interested.
mud
ORIGINAL: jmpancoast
Here are the components I used and the cost. Alsohave listed a couple things I did to reduce cost.
Spokes 45-0607 22.99 J&P Cycles
21" Rim2000195 99.99J&P Cycles
Spare Dyna Hub 50.00 Forum Member
MH90-21Tirew/tube98.55Dealer
Lacing 0.00Did myself
Truing40.00Dealer
Tire mount and balance 40.00 Dealer
Instead of using my existing hub (which would have made my old wheel worthless and gave me down time of the bike), I found a forum member who had a bent rim. I purchased it for $50.00 with the intent of just using that hub on the new wheel build. (Make sure if you find a hub, you get one for the correct size axle). When the rim arrived, I discovered the tire and rotor were included and both in very good shape. I used the floating rotor on my bike. The rotor and hub cleaned up to look like new. I hope to sell my original rotor for about $25.00 and the tire for $25.00. I have already sold my take-off wheel for $150.00 plus shipping to a forum member. Using the hub from the purchased bent rim allowed me to recoop $150.00 to $200.00 of the cost making this a pretty reasonably priced mod. I laced the hub to teh rim myself, which saved even more money. I used the steps as outlined in the service manual.
Sold 19" wheel and tire -150.00 Forum member
Hope to sell rotor and tire - 50.00
which came with spare hub
Total out of pocket ended up being about $190.00 including shipping charges of parts.
Here are the components I used and the cost. Alsohave listed a couple things I did to reduce cost.
Spokes 45-0607 22.99 J&P Cycles
21" Rim2000195 99.99J&P Cycles
Spare Dyna Hub 50.00 Forum Member
MH90-21Tirew/tube98.55Dealer
Lacing 0.00Did myself
Truing40.00Dealer
Tire mount and balance 40.00 Dealer
Instead of using my existing hub (which would have made my old wheel worthless and gave me down time of the bike), I found a forum member who had a bent rim. I purchased it for $50.00 with the intent of just using that hub on the new wheel build. (Make sure if you find a hub, you get one for the correct size axle). When the rim arrived, I discovered the tire and rotor were included and both in very good shape. I used the floating rotor on my bike. The rotor and hub cleaned up to look like new. I hope to sell my original rotor for about $25.00 and the tire for $25.00. I have already sold my take-off wheel for $150.00 plus shipping to a forum member. Using the hub from the purchased bent rim allowed me to recoop $150.00 to $200.00 of the cost making this a pretty reasonably priced mod. I laced the hub to teh rim myself, which saved even more money. I used the steps as outlined in the service manual.
Sold 19" wheel and tire -150.00 Forum member
Hope to sell rotor and tire - 50.00
which came with spare hub
Total out of pocket ended up being about $190.00 including shipping charges of parts.