Kury Panacea Smoke Signals Pics
#1
12-10-2007, 11:30 AM
Kury Panacea Smoke Signals Pics
Here are some pics of the new signals I added with the Attitude paint job...I really like the system & the rear lights. They fast flash 5 times when braking, an attention getter.
Fully Off
.JPG)
Fully On
.JPG)
Right Blinker On
.JPG)
Fronts Off
.JPG)
Fronts Running
.JPG)
Fronts Left Blinker
.JPG)
Fully Off
Fully On
Right Blinker On
Fronts Off
Fronts Running
Fronts Left Blinker
#3
12-10-2007, 01:16 PM
RE: Kury Panacea Smoke Signals Pics
Did you have to use a load equalizer for the front turn signals? I used to have Panacea on back of bike(which required load equalizer) and was told a 2nd was needed for front turn signals.
#4
12-10-2007, 01:30 PM
RE: Kury Panacea Smoke Signals Pics
ORIGINAL: Unome
Did you have to use a load equalizer for the front turn signals? I used to have Panacea on back of bike(which required load equalizer) and was told a 2nd was needed for front turn signals.
Did you have to use a load equalizer for the front turn signals? I used to have Panacea on back of bike(which required load equalizer) and was told a 2nd was needed for front turn signals.
#6
12-10-2007, 04:39 PM
RE: Kury Panacea Smoke Signals Pics
ORIGINAL: golfblues
I have the factory alarm & to keep the security light off I had to use part #4857 alarm load equalizer. It works like a charm with the front & rear panaceas. I used the 1 equalizer as instructed by Custom Dynamics, the dealer I purchased the lights from. I'm not using either equalizer that came with the front or rear lights. If you don't have an alarm I believe you can plug in both equalizers that come with the lights but I'm not sure. I also have the new updated control module that has plugs for 2 loads.
I have the factory alarm & to keep the security light off I had to use part #4857 alarm load equalizer. It works like a charm with the front & rear panaceas. I used the 1 equalizer as instructed by Custom Dynamics, the dealer I purchased the lights from. I'm not using either equalizer that came with the front or rear lights. If you don't have an alarm I believe you can plug in both equalizers that come with the lights but I'm not sure. I also have the new updated control module that has plugs for 2 loads.
Your front turn signals LED's are just the normal bullet LED's right? The rear ones are the panaceas specific turn signals?
And, yes, your bike looks sweet dude!
#7
12-10-2007, 04:52 PM
RE: Kury Panacea Smoke Signals Pics
ORIGINAL: cosmicHD
So just the single alarm load equalizer worked for everything? That is interesting to know.
Your front turn signals LED's are just the normal bullet LED's right? The rear ones are the panaceas specific turn signals?
And, yes, your bike looks sweet dude!
ORIGINAL: golfblues
I have the factory alarm & to keep the security light off I had to use part #4857 alarm load equalizer. It works like a charm with the front & rear panaceas. I used the 1 equalizer as instructed by Custom Dynamics, the dealer I purchased the lights from. I'm not using either equalizer that came with the front or rear lights. If you don't have an alarm I believe you can plug in both equalizers that come with the lights but I'm not sure. I also have the new updated control module that has plugs for 2 loads.
I have the factory alarm & to keep the security light off I had to use part #4857 alarm load equalizer. It works like a charm with the front & rear panaceas. I used the 1 equalizer as instructed by Custom Dynamics, the dealer I purchased the lights from. I'm not using either equalizer that came with the front or rear lights. If you don't have an alarm I believe you can plug in both equalizers that come with the lights but I'm not sure. I also have the new updated control module that has plugs for 2 loads.
Your front turn signals LED's are just the normal bullet LED's right? The rear ones are the panaceas specific turn signals?
And, yes, your bike looks sweet dude!
Thanks for the compliment too!: 4825
Thread
Thread Starter
Forum
Replies
Last Post
