V&H Fuel-Pac
#1
#3
RE: V&H Fuel-Pac
ORIGINAL: Dave2007
Has anyone ever used the V&H Fuel-Pac? I just ordered the fuel-pac, V&H BSS pipes & K&N A/C. I'm putting all on a 2007 Street BoB. Any info on tha fuel-pac would be helpfull.
Thanks
Dave
Has anyone ever used the V&H Fuel-Pac? I just ordered the fuel-pac, V&H BSS pipes & K&N A/C. I'm putting all on a 2007 Street BoB. Any info on tha fuel-pac would be helpfull.
Thanks
Dave
If you have any problems with decel popping after your install like some have, you can make the changes below to resolve the decel popping.
Change mode 23 from 16 to 50 and the decel popping will go away. All the HD settings for all the diffrent pipe configurations on mode 23 are set at 16,the change from 16 to 50 on mode 23changes the way the fuel pack reacts with the factory ECM, it does not richen or lean anything out. I talked with Adam at V&H after hearing this information from another person and he confirmed that it is ok to do and will solve the decel popping. Worked great on my 07 RKCwith the fuel pack& V&H Oval mufflers along with the stage 1 A/C unit.
Take Care,
Bill G
#4
RE: V&H Fuel-Pac
Bill G Im having that problem, had a fuelpak with SE mufflers it was fine. now i have rush 2" and it pops when i roll of the throttle i was thinking of changing to the settings for the 2.5" but now you sugest this for mode 23. Do you still get the same performence, no probelms?
#5
RE: V&H Fuel-Pac
ORIGINAL: jf
Bill G Im having that problem, had a fuelpak with SE mufflers it was fine. now i have rush 2" and it pops when i roll of the throttle i was thinking of changing to the settings for the 2.5" but now you sugest this for mode 23. Do you still get the same performence, no probelms?
Bill G Im having that problem, had a fuelpak with SE mufflers it was fine. now i have rush 2" and it pops when i roll of the throttle i was thinking of changing to the settings for the 2.5" but now you sugest this for mode 23. Do you still get the same performence, no probelms?
The performance stays the same as it does not richen or lean out the fuel curve in the map, it just changes how the fuel pack inner reacts with the factory ECM on decel. My bike runs great with no performance changes. Give it a try, you can always change it back if you do not like it.
Take of the clear cover, turn on the ingnition switch, scrole to mode 23, change setting from 16 to 50, turn the ingnition switchoff for a few seconds, turnthe ignition switchback on and scrole to mode 23 and make sure it took the new setting, shutthe ignition switchoff, reinstall clear cover and your good to go...
Take Care,
Bill G
#6
RE: V&H Fuel-Pac
If you have any problems with decel popping after your install like some have, you can make the changes below to resolve the decel popping.
Change mode 23 from 16 to 50 and the decel popping will go away. All the HD settings for all the diffrent pipe configurations on mode 23 are set at 16,the change from 16 to 50 on mode 23changes the way the fuel pack reacts with the factory ECM, it does not richen or lean anything out. I talked with Adam at V&H after hearing this information from another person and he confirmed that it is ok to do and will solve the decel popping. Worked great on my 07 RKCwith the fuel pack& V&H Oval mufflers along with the stage 1 A/C unit.
Take Care,
Bill G
Change mode 23 from 16 to 50 and the decel popping will go away. All the HD settings for all the diffrent pipe configurations on mode 23 are set at 16,the change from 16 to 50 on mode 23changes the way the fuel pack reacts with the factory ECM, it does not richen or lean anything out. I talked with Adam at V&H after hearing this information from another person and he confirmed that it is ok to do and will solve the decel popping. Worked great on my 07 RKCwith the fuel pack& V&H Oval mufflers along with the stage 1 A/C unit.
Take Care,
Bill G
Thanks for the tip, too bad it didn’t work.
Gregg
#7
RE: V&H Fuel-Pac
I just ordered the FuelPak for my 06 Dyna. Unfortunately the V&H Straightshots HS slip-ons that I also ordered are on backorder. Planning to use an SE air cleaner. I'll let you know how it runs when it gets installed.
Anyone else running the FuelPak on a 2006 model with O2 sensors?
Anyone else running the FuelPak on a 2006 model with O2 sensors?
Trending Topics
#8
RE: V&H Fuel-Pac
ORIGINAL: FLHRSE3
This may work on the 96’s but not on the 110’s. I just went and tried this and it was downright embarrassing to ride, couldn’t even let off to shift with out Bap, Bap, Bap. I guess I’ll put it back to 16 and give Adam a call tomorrow to see if there is a fix for the 110’s.
Thanks for the tip, too bad it didn’t work.
Gregg
If you have any problems with decel popping after your install like some have, you can make the changes below to resolve the decel popping.
Change mode 23 from 16 to 50 and the decel popping will go away. All the HD settings for all the diffrent pipe configurations on mode 23 are set at 16,the change from 16 to 50 on mode 23changes the way the fuel pack reacts with the factory ECM, it does not richen or lean anything out. I talked with Adam at V&H after hearing this information from another person and he confirmed that it is ok to do and will solve the decel popping. Worked great on my 07 RKCwith the fuel pack& V&H Oval mufflers along with the stage 1 A/C unit.
Take Care,
Bill G
Change mode 23 from 16 to 50 and the decel popping will go away. All the HD settings for all the diffrent pipe configurations on mode 23 are set at 16,the change from 16 to 50 on mode 23changes the way the fuel pack reacts with the factory ECM, it does not richen or lean anything out. I talked with Adam at V&H after hearing this information from another person and he confirmed that it is ok to do and will solve the decel popping. Worked great on my 07 RKCwith the fuel pack& V&H Oval mufflers along with the stage 1 A/C unit.
Take Care,
Bill G
Thanks for the tip, too bad it didn’t work.
Gregg
All the decel popping whent away on my bike at the 50 setting on mode 23, Adam also said I could try 15 instead of the 50 setting to minimize the decel popping. I did try the 15 setting and my bike still had some decel popping. I know there is a big diffrence between 15 and 50 on settings but again the 50 setting worked great on my bike and she runs great. V&H will not tell you what the settings mean, so a guy is sort of in the dark.Again I am happy with the way my bike runs and in the end that is all that matters.
Take Care,
Bill G
#9
RE: V&H Fuel-Pac
If they told you it doesn't richen or lean ANYTHING, they LIED. the popping on decel is caused bya lean condition called lean misfire. Mind you, this does not affect performace or longevity of the engine and has NO bad effects other than the popping (as long as it is only on decel)
if the popping went away, its because the 0-2% throttle has been richened up at the higher RPMs.
and there have been MANY problems with the feul paks on the 06 dynas and all the 07's. due to the o2 sensors. there is a fix though. get your settings online, since they give you more settings after the 19 value that the paperwork that comes with the unit does not have. and make sure the package says v12....... that is the software version that is able to correct the issues that they have been having.
if the popping went away, its because the 0-2% throttle has been richened up at the higher RPMs.
and there have been MANY problems with the feul paks on the 06 dynas and all the 07's. due to the o2 sensors. there is a fix though. get your settings online, since they give you more settings after the 19 value that the paperwork that comes with the unit does not have. and make sure the package says v12....... that is the software version that is able to correct the issues that they have been having.
#10
RE: V&H Fuel-Pac
ORIGINAL: jmetro
If they told you it doesn't richen or lean ANYTHING, they LIED. the popping on decel is caused bya lean condition called lean misfire. Mind you, this does not affect performace or longevity of the engine and has NO bad effects other than the popping (as long as it is only on decel)
if the popping went away, its because the 0-2% throttle has been richened up at the higher RPMs.
and there have been MANY problems with the feul paks on the 06 dynas and all the 07's. due to the o2 sensors. there is a fix though. get your settings online, since they give you more settings after the 19 value that the paperwork that comes with the unit does not have. and make sure the package says v12....... that is the software version that is able to correct the issues that they have been having.
If they told you it doesn't richen or lean ANYTHING, they LIED. the popping on decel is caused bya lean condition called lean misfire. Mind you, this does not affect performace or longevity of the engine and has NO bad effects other than the popping (as long as it is only on decel)
if the popping went away, its because the 0-2% throttle has been richened up at the higher RPMs.
and there have been MANY problems with the feul paks on the 06 dynas and all the 07's. due to the o2 sensors. there is a fix though. get your settings online, since they give you more settings after the 19 value that the paperwork that comes with the unit does not have. and make sure the package says v12....... that is the software version that is able to correct the issues that they have been having.
Take Care,
Bill G