Mark this thread as Unsold
SE HiFlo Open Filter, Forcewinder elbow, DMcycle bracket
#1
SE HiFlo Open Filter, Forcewinder elbow, DMcycle bracket
works for 88TC motors
had this DM cycle breather bracket on for a while with a Forcewinder elbow and element. had some seeping issues at the head, bought the SE version of the Forcewinder and turns out that it wasn't the bracket (looking like flapper valve problem)
so, didn't like the bigger screamin' eagle element but kept the rest of the system. so what i've got here is:
- DM Cycle breather, new shim kit, new breather bolts, new gaskets (all from DM).
- Forcewinder elbow, painted flat black (not powdercoated)
- Screamin' Eagle open element, band clamp, chrome inner ring (all never used).
i scuffed up both sides of the bracket where the gaskets mount to try and get a better seal on the chrome (suggestion from a tech) but the part you see is all nice and shiny.
lookin in the neighborhood of $150
thanks, flynn
[IMG]local://upfiles/14313/5DBE68FB78C9482B9F995C056C73AF88.jpg[/IMG]
had this DM cycle breather bracket on for a while with a Forcewinder elbow and element. had some seeping issues at the head, bought the SE version of the Forcewinder and turns out that it wasn't the bracket (looking like flapper valve problem)
so, didn't like the bigger screamin' eagle element but kept the rest of the system. so what i've got here is:
- DM Cycle breather, new shim kit, new breather bolts, new gaskets (all from DM).
- Forcewinder elbow, painted flat black (not powdercoated)
- Screamin' Eagle open element, band clamp, chrome inner ring (all never used).
i scuffed up both sides of the bracket where the gaskets mount to try and get a better seal on the chrome (suggestion from a tech) but the part you see is all nice and shiny.
lookin in the neighborhood of $150
thanks, flynn
[IMG]local://upfiles/14313/5DBE68FB78C9482B9F995C056C73AF88.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
BIGDADI
Dyna Glide Models
5
04-25-2009 09:12 PM
waterman7474
Exhaust System Topics
1
02-22-2007 05:44 PM