Wheel Powder Coating - in SF Bay area?
#2
Join Date: Mar 2007
Location: Chicago suburbs (Elgin/Schaumburg)
Posts: 19,481
Likes: 0
Received 25 Likes
on
23 Posts
The following users liked this post:
duckf5 (07-17-2021)
#4
#6
Join Date: Mar 2007
Location: Chicago suburbs (Elgin/Schaumburg)
Posts: 19,481
Likes: 0
Received 25 Likes
on
23 Posts
1 post huh... sneaky sneaky..
anyway, yes you can send with rubber on, we can pull the rubber and replace it for $60, we pull bearings and will reuse them if they look good still for $20 her wheel, we charge 1.25 per spoke to powder, 35 for the ring (most rims) and 35-45 for the hubs (most rims)
to unlace we charge $35 per rim, to relace we charge $65 per rim, true the wheel runs various costs as some run longer than others to dial in... then send out! makes it a one stop shop bud!
anyway, yes you can send with rubber on, we can pull the rubber and replace it for $60, we pull bearings and will reuse them if they look good still for $20 her wheel, we charge 1.25 per spoke to powder, 35 for the ring (most rims) and 35-45 for the hubs (most rims)
to unlace we charge $35 per rim, to relace we charge $65 per rim, true the wheel runs various costs as some run longer than others to dial in... then send out! makes it a one stop shop bud!
The following users liked this post:
duckf5 (07-17-2021)
#7
There is nothing sneaky about it. I use this forum to help me with maintenance and upgrades on my 2006 electra glide. Just because I dont post on here all the time means nothing. When I have something USEFUL to add, I will.
I ran into a very nice guy with reasonable prices that is local to me (he is in stockton and I am in discovery bay) I am just trying to pass his quality work, reasonable prices, quick turn around onto a fellow rider.
You are not even in the same locale so I cannot fathom how this would affect your cashflow.
I am a telecommunications engineer for the FAA. I don't make my money powder coating parts for people.
Back to the original poster, feel free to contact me at the number listed and I will put you in contact with my powder coater. Anyone else that needs the same is welcome also.
Dan
I ran into a very nice guy with reasonable prices that is local to me (he is in stockton and I am in discovery bay) I am just trying to pass his quality work, reasonable prices, quick turn around onto a fellow rider.
You are not even in the same locale so I cannot fathom how this would affect your cashflow.
I am a telecommunications engineer for the FAA. I don't make my money powder coating parts for people.
Back to the original poster, feel free to contact me at the number listed and I will put you in contact with my powder coater. Anyone else that needs the same is welcome also.
Dan
The following users liked this post:
duckf5 (07-17-2021)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
hammerchase72@gmail.com
Powdercoat & Paint
12
09-28-2017 10:13 AM