Hi, I have a 97 Road King cast wheel but the spacer in the middle looks like what came off a spoked wheel which was what came on it stock. Im wondering because I was looking at the parts breakdown on the Ronnies parts page(cool find) and it shows a different middle spacer is used if you have a cast wheel than a spoke. The cast spacer looks as if there are heads on the ends. Anyone know what this is?
thanks

 

If I understand you correctly, you may have reversed "what goes with what" ... Ronnies shows the one with "Heads" as being for Laced Spoke

Here's a pic of a similar Spacer Sleeve for a OE Steel Hubbed Laced Spoke (with "Heads" )... It approximately centers the sleeve in the wheel prior to axle insertion

 

Yes! thats what im referring to but when i looked up the parts blow up on Ronnies it said the opposite. Thanks for clarifying that!

 

This is Ronnie’s showing the flanged for cast only

 

 

Here's the NON-mobile listing for a 1997 Road King

 

 

This is from a desktop what is the address you have?

 

partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?Type=13&make=hdmc&a=249&b=25&c=0&d=1 997%20FLHR%20ROAD%20KING%AE%20(CARBURATED)%20(FD)% 20WHEEL%20-%20FRONT%20WHEEL%20ASSEMBLY%20W/%20BRAKE%20DISK

 

ok thats the front, im working the rear