I looked in svs. manual can't find plug I pulled...
#1
04-04-2013 | 12:25 AM
Thread Starter
|
Stage III
Joined: Apr 2013
Posts: 3
Likes: 0
From: Iowa
I looked in svs. manual can't find plug I pulled...
I did my first softail oil change on my fatboy, first plug i pulled got me about 3/4 of a quart of reaaaly diry oil out....I then realized that was obviously not the right plug....went back to the manual found the right plug...Now I have no oil in there at all, and a fresh filter installed...ready to fill back up with oil...Problem is....I cant find what the first plug is in the manual anywhere???...read other posts that suggested it was the frost plug?...still, cant find a definate answer...its located just foreward of the oil drain plug, and is recessed torque plug with no sealants on it, No, I did not drain my tranny or primary...So what is it guys? the frost plug or an imaginary plug i found that happened to get a little dirty oil out...someone tell my im not going crazy here...and any advice if i should go ahead and top of the oil, and start it up....or did i drain anything else that would make me NOT want to do that yet?....Thanks!...~~FatBoyBull~~
Last edited by FatBoyBull; 04-04-2013 at 12:36 AM. Reason: forgot information:~~2009 FLSTF
#7
04-04-2013 | 08:32 AM
Outstanding HDF Member
Joined: Aug 2008
Posts: 3,078
Likes: 6
From: Michigan
