Cycle Electric 3-Phase Charging Systems for Harley-Davidson Motorcycles
#1
Cycle Electric 3-Phase Charging Systems for Harley-Davidson Motorcycles
Replacing a worn-out charging system is no problem when you’ve got a Cycle Electric 3-Phase charging kit on the work bench. Everything you need is in the box: stator, rotor, regulator/rectifier and all required installation components. Generally speaking, when one part of the charging system goes bad, other components are suspect as well, and with this kit at the ready, there’s no question all is well.
3-phase charging systems have a particular advantage over the stock unit fitted to most HD models in that they provide a more consistent power supply downstream, especially at lower engine RPMs. If you’re often a stop-and-go traffic rider, this is the charging system for you. Furthermore, if you’ve got a bike loaded with aftermarket electric components, sensitive components will certainly last longer thanks to the improved power output stability of these kits.
These American-made components are backed by a two year manufacturer warranty.
Available in 38 or 50 amp variants for older models, and 50 amp for newer bikes, you can read more about this kit on our website here.
To order yours, just give us a call on 888.575.6570, send us a PM here or an email to forums@partsgiant.com and be sure to include your exact model and year machine along with your preferred output amperage (38A or 50A) and we’ll get back to you right away.
3-phase charging systems have a particular advantage over the stock unit fitted to most HD models in that they provide a more consistent power supply downstream, especially at lower engine RPMs. If you’re often a stop-and-go traffic rider, this is the charging system for you. Furthermore, if you’ve got a bike loaded with aftermarket electric components, sensitive components will certainly last longer thanks to the improved power output stability of these kits.
These American-made components are backed by a two year manufacturer warranty.
Available in 38 or 50 amp variants for older models, and 50 amp for newer bikes, you can read more about this kit on our website here.
To order yours, just give us a call on 888.575.6570, send us a PM here or an email to forums@partsgiant.com and be sure to include your exact model and year machine along with your preferred output amperage (38A or 50A) and we’ll get back to you right away.
__________________
Contact us for discounts exclusive to HDForum members. Some exclusions apply.
Email: forums@partsgiant.com
Phone: 888-575-6570 ext 817
www.partsgiant.com
Contact us for discounts exclusive to HDForum members. Some exclusions apply.
Email: forums@partsgiant.com
Phone: 888-575-6570 ext 817
www.partsgiant.com
Thread
Thread Starter
Forum
Replies
Last Post
Parts Giant
Parts Giant
0
07-22-2019 10:43 AM
Parts Giant
Vendor For Sale Classifieds
0
06-05-2019 11:30 AM