Tick tock
#132
10-18-2023 | 04:03 PM
6th Gear
Joined: Oct 2023
Posts: 11
Likes: 3
From: Colorado
S&S 570 cams
If you look at one of my posts, I did the same thing. I had that annoying tick. I was using S&S quickies, the large collar on the pushrod was hitting the push rod tubes. You could see the witness marks on the pushrods.
I reamed my pushrod tubes out, shortened the length on each end by .35 and used just straight adjustable S&S pushrods. Problem solved. S&S 570 cams.
I reamed my pushrod tubes out, shortened the length on each end by .35 and used just straight adjustable S&S pushrods. Problem solved. S&S 570 cams.
Bull.D
#133
10-18-2023 | 04:24 PM
Thread Starter
|
Club Member
Joined: Dec 2014
Posts: 10,546
Likes: 3,547
From: SWFL
The following users liked this post:
Harley1004 (10-18-2023)
#134
10-18-2023 | 04:42 PM
Club Member
Joined: Jun 2018
Posts: 2,192
Likes: 468
From: WI
The following users liked this post:
Mchad (10-18-2023)
#135
10-18-2023 | 04:50 PM
Thread Starter
|
Club Member
Joined: Dec 2014
Posts: 10,546
Likes: 3,547
From: SWFL
No doubt. But not if FedEx has anything to do with it. Rockers were sent on Mon, expected del on Thurs. Yesterday got an email saying "early" for today, yay. Then about an hour ago I got a delayed until Sat. I swear, every single package that passed through FedEx's Ocala, Floriduh depot is delayed. Every one...
#136
10-18-2023 | 05:15 PM
Seasoned HDF Member
Joined: Dec 2005
Posts: 17,466
Likes: 6,195
From: poway
Who make the gear driven cam tensioner? I thought they were either spring or hydraulic.
The following users liked this post:
Harley1004 (10-18-2023)
#137
10-18-2023 | 05:38 PM
Road Warrior
Joined: May 2011
Posts: 1,885
Likes: 366
From: florida
Haaaaaaaaaa
The following users liked this post:
Harley1004 (10-18-2023)
#138
10-18-2023 | 07:09 PM
Seasoned HDF Member
Joined: Mar 2010
Posts: 18,473
Likes: 5,570
From: Poolville
The following 2 users liked this post by 98hotrodfatboy:
Harley1004 (10-18-2023),
Mchad (10-18-2023)