Advice upgrading 2001 EFI system. Any and all. Thank you
#11
08-20-2021 | 04:53 PM
Thread Starter
|
Intermediate
Joined: Jul 2021
Posts: 49
Likes: 9
From: PA
#12
08-20-2021 | 05:17 PM
I used the ignition harness from an 02-03 touring. No gauges, no main harness or anything that complicated were needed. (Post number 8 should say 02-03 not 01-02). Using an 05a or later ecm allows you to wire in factory 02 sensors and use a closed loop cal.
Looks like in the conversion referenced in post 10 the gauges are on the bus but I did ‘t see the need to rewire the whole bike and replace gauges.
I have an 00 FLTRSEI and kept the CVO gauges.
Looks like in the conversion referenced in post 10 the gauges are on the bus but I did ‘t see the need to rewire the whole bike and replace gauges.
I have an 00 FLTRSEI and kept the CVO gauges.
Last edited by Ed Ramberger; 08-20-2021 at 05:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post