30 Tooth Sprocket
#1
30 Tooth Sprocket
I are ready have just about all the cooling equipment installed on my 10 Tri, see signuture line. The other day took at trip, with another TRi, but it was a stock 11. He got better gas milage than I did. when I had to fill, he could have gone another, 30-40 miles miles.
What would the advanage of installing a 30 Tooth, give me. with the equipment already install?
What would be the cost? ie parts and labor. Is the back portion of the trike required to be removed?
Thanks
Robert
What would the advanage of installing a 30 Tooth, give me. with the equipment already install?
What would be the cost? ie parts and labor. Is the back portion of the trike required to be removed?
Thanks
Robert
#2
Robert, as expressed in other posts, the 30t. pulley is a must! Acceleration is much improved, climbing hills has improved without lugging, and 6th gear is usable now at lower speeds! I had a dealer do mine for about $400 mainly because I didn't want to buy the special tools and do the intense labor (for me anyway). I don't know about change in gas mileage yet. I'll check it on a long trip. I'm sure others will chime in here with their experiences on the pulley change. BTW, that pulley is always on backorder from the MoCo. Obviously, a very popular item!
P.S. Also read the first sticky by msocko3.
P.S. Also read the first sticky by msocko3.
Last edited by Boom; 04-10-2011 at 07:29 PM.
#3
Robert, +1 on everything Boom said. My dealer installed for $396.95. That price included the gear and all the seals, gaskets, nuts, bolts, etc. Labor rate was $79/hr. Seeing your mods, I can tell you that with the 30T, it will pull in 5th and 6th like you can't imagine. The gear ratio will put your torque right where the cam gives it to you. Because the engine is running closer to peak torque at highway speeds, it will take much less throttle and possibly improve your mileage.
Last edited by TheBobs; 04-11-2011 at 05:03 PM.
#4
Feedback Engineering
The 30T Pulley is everything the above post stated and then some. I however and every 09-2010 owners should be furious! HD might get a pass on the heat problems since 90% of it is EPA mandated!
The gearing! DON'T ANYBODY AT HARLEY EVER RIDE THESE DAMN THINGS?
Three years into a production run to get the gearing right! There is no excuse for it and no excuse for all the 09 and 10 triglide owners having to do this modification! This should have been a call back for all the 09 and 10 owners that wanted it and the intallation paid for by HD. An obvious admission the gearing was crap when they come out with the 30T on the 11's.
The gearing! DON'T ANYBODY AT HARLEY EVER RIDE THESE DAMN THINGS?
Three years into a production run to get the gearing right! There is no excuse for it and no excuse for all the 09 and 10 triglide owners having to do this modification! This should have been a call back for all the 09 and 10 owners that wanted it and the intallation paid for by HD. An obvious admission the gearing was crap when they come out with the 30T on the 11's.
#5
#6
I will be off to HD Tomorrow. I'll get them to install the 30 T. It there anyway because of a complaint to HD, about the weak and eneffective rear brake. The service manger is sure that HD will replace them using the 2011 brake system.
I'll let you know how this works out.
Robert
I'll let you know how this works out.
Robert
#7
The 30T Pulley is everything the above post stated and then some. I however and every 09-2010 owners should be furious! HD might get a pass on the heat problems since 90% of it is EPA mandated!
The gearing! DON'T ANYBODY AT HARLEY EVER RIDE THESE DAMN THINGS?
Three years into a production run to get the gearing right! There is no excuse for it and no excuse for all the 09 and 10 triglide owners having to do this modification! This should have been a call back for all the 09 and 10 owners that wanted it and the intallation paid for by HD. An obvious admission the gearing was crap when they come out with the 30T on the 11's.
The gearing! DON'T ANYBODY AT HARLEY EVER RIDE THESE DAMN THINGS?
Three years into a production run to get the gearing right! There is no excuse for it and no excuse for all the 09 and 10 triglide owners having to do this modification! This should have been a call back for all the 09 and 10 owners that wanted it and the intallation paid for by HD. An obvious admission the gearing was crap when they come out with the 30T on the 11's.
Trending Topics
#8
I will be off to HD Tomorrow. I'll get them to install the 30 T. It there anyway because of a complaint to HD, about the weak and eneffective rear brake. The service manger is sure that HD will replace them using the 2011 brake system.
I'll let you know how this works out.
Robert
I'll let you know how this works out.
Robert
Also, I used to complain about the lack of power starting from a dead stop when the engine was hot. Now, with the new pulley, it does not seem to be as severe. I still have the stock cam.