willy shiny chrome wheel exchange
#11
Hi Mike,
The wheel spacers are for the chromed front wheel that I'm getting as part of the set. They replace the plain pipe wheel spacers that come stock.
***** Shiney Wheel Spacers
They were about $90 I believe.
Tony
The wheel spacers are for the chromed front wheel that I'm getting as part of the set. They replace the plain pipe wheel spacers that come stock.
***** Shiney Wheel Spacers
They were about $90 I believe.
Tony
Last edited by TKanaley; 03-27-2011 at 10:38 AM.
#12
Hi Mike,
The wheel spacers are for the chromed front wheel that I'm getting as part of the set. They replace the plain pipe wheel spacers that come stock.
***** Shiney Wheel Spacers
They were about $90 I believe.
Tony
The wheel spacers are for the chromed front wheel that I'm getting as part of the set. They replace the plain pipe wheel spacers that come stock.
***** Shiney Wheel Spacers
They were about $90 I believe.
Tony
Yeah Right!!
#13
Folks, I'm usually positive and polite in my posts, however---
I am looking for opinions of this product, or suggestions for alternative sources. Stock tri glide ultra aluminum wheels suck. They corrode rapidly, and are hell to clean. Add this to your list for flaws in the trike I love so much.
p(pissy)c(customer)mikey(mikey will eat anything---not really, I have standards like any other DOM)
Mike
I am looking for opinions of this product, or suggestions for alternative sources. Stock tri glide ultra aluminum wheels suck. They corrode rapidly, and are hell to clean. Add this to your list for flaws in the trike I love so much.
p(pissy)c(customer)mikey(mikey will eat anything---not really, I have standards like any other DOM)
Mike
Jim
#14
chrome stock wheels
Thanks for your reply. I am going with your reccomendation. When I bought the trike last year, I added every bell and whistle in the book. This included the fancy nut covers for the rear wheels, which I would like to keep. You don't know of any problem with this, do you?
Since then I have done some stuff myself, including jackpot 2-1-2 headers, PCV, Autotune, and 2.25" Rush baffles. Topped it off with a low end map from Keith at Fuelmoto. I left the USB connected, so all I have to do is pop the RH cover. I plan to install a switch and a high end map, as well. The trike sounds like rolling thunder. I never turn my audio stuff on because I like to listen to the growl of the beast.
Who did you buy the 10 blade fanned oil cooler from?
Best
Mike
#17
Casper,
I'd check with Jim and see how that company worked it out. If they did an exchange then that's an excellent price. If Jim had to send his own wheels in which I think he did, that's another story. Are you prepared to be up on jacks for maybe two to three weeks? My ***** Shiney's arrived on Wednesday and were on the bike by Friday. The cores were shipped back yesterday. I was only down 1/2 a day to have the tires remounted and to balance the wheels.
I'd check with Jim and see how that company worked it out. If they did an exchange then that's an excellent price. If Jim had to send his own wheels in which I think he did, that's another story. Are you prepared to be up on jacks for maybe two to three weeks? My ***** Shiney's arrived on Wednesday and were on the bike by Friday. The cores were shipped back yesterday. I was only down 1/2 a day to have the tires remounted and to balance the wheels.
#18
Thanks OM
Surf City Chrome Exchange.
Rear = $190.00ea. - Front = $305.00 with a 2 week turn around.
http://www.surfcitychrome.com/index.html
Last edited by Casper; 03-29-2011 at 01:09 PM.
#19
chroming front wheel
Thanks OM
Surf City Chrome Exchange.
Rear = $190.00ea. - Front = $305.00 with a 2 week turn around.
http://www.surfcitychrome.com/index.html
Surf City Chrome Exchange.
Rear = $190.00ea. - Front = $305.00 with a 2 week turn around.
http://www.surfcitychrome.com/index.html
#20