Stage 1, AC and "super trap" slip-ons-anyone done this?
#51
It took less than 2 hours to install.
The cruise works fine but my 6th gear light does not work.
I don't have any warranty according to HD since I had the Champion Conversion installed?
My bike had a 34T, so the 30T made a huge difference.
This has been one of my best mods to date.
#52
30t
Mr Wizards post shows the prices for the 30T sprocket and the Chain.
It took less than 2 hours to install.
The cruise works fine but my 6th gear light does not work.
I don't have any warranty according to HD since I had the Champion Conversion installed?
My bike had a 34T, so the 30T made a huge difference.
This has been one of my best mods to date.
It took less than 2 hours to install.
The cruise works fine but my 6th gear light does not work.
I don't have any warranty according to HD since I had the Champion Conversion installed?
My bike had a 34T, so the 30T made a huge difference.
This has been one of my best mods to date.
Last edited by icebite1; 04-12-2010 at 08:07 AM. Reason: add
#53
Where would i find Mr.Wizards post so i dont have to do a lot of searching? You mentioned chain but mine was belt drive final on'07 FLHRS. Andrews 30t pulley #1201-0227 $117, HD belt #40056-07 $182, Baker speed cal.unit #95E-56A $111, Gaskets/Misc. $82. ----- my cruise also works fine but have discovered the 6th gear lite does not work (could never see it in daylite anyhow)
Arrggg..
#54
gear
dbn.. icebite did the same conversion that I did (front belt pulley). You did the compensating sprocket on your trike (front chain gear). The pricing info is for the compensating sprocket change. Some people are saying they can't find the info on the compensating sprocket change anymore so I posted it for them. Post #44 on page 5
Arrggg..
Arrggg..
#55
Thread
Thread Starter
Forum
Replies
Last Post
snacks63
Sportster Models
7
01-10-2010 12:09 PM