Hi, I recently bought a leveling kit for a 2018 tri-glide. I installed it and the exhaust on the right side seems awful close to the swing arm. any body evr run into this? thanks

 

What is a leveling kit? Got a photo or link to one?

 

Must be referring to the comfort lift brackets.

 

Go to ebay and type in leveling kit for harley tri-glide



go to ebay and search leveling kit for tri-glide

 

Perhaps as a new member you could provide a link to said leveling kit so as not to cause us old guys to do your work for you.

You may get a better input if your response is not condescending, just saying.

Best regards and hope you figure it out.

 

OP, Is this the item you are speaking of?

 

I put a 1 inch lift kit on my Tri Glide and the exhaust was hitting the frame. I replaced it with the stock shock brackets and it's still only clears about a quarter of an inch if that. You can turn the pipe a little bit and get a little more clearance.

 

There have been quite a few changes over the years that affect the ride height of the HD Trikes, along with swingarm to exhaust clearance.

Here is a video explaining what they are and the implications, depending on your particular ride.

 

[QUOTE=470004;21459146]OP, Is this the item you are speaking ofyes that is the kit i used. sorry i didn't have a link to go to it, i'm old too!

 

yes that is the kit i used. i didn't look at the clearence before i put the jsck under the frame so are the stock ones still that close or raising the body make it that closer?