New Street Glide Rear Fender/Fascia
#1
New Street Glide Rear Fender/Fascia
New, still in the factory box, street glide rear fender and fascia for sale. This is the 2009 3 light style, fits from 2009 and up - would be great for a 2014 with a detachable tour pack as it has the correct indentations for a signal bar. $300 shipped conus.
#3
#7
I was planning to do this myself, I can't find the post but there was someone that did it, posted somewhere on HDF with this fender and stock 14 lights - basically you get the mustache bar and plug the leads into the blank sockets in your taillight and you are good to go.
Trending Topics
#8
I checked my 2014 parts manual and it does confirm that this fender WILL fit a 2014. It's unfortunate that dealership staff are pretty clueless as to what will interchange an what won't. I ran into the same thing when building my Dyna..
Looking at the 2014 street glide for both the US and Canada (still uses the 3 light setup) you get the following part numbers for a rear fender in primer:
US 60575-10
CAN 59731-09
Fascia p/n
59739-09
Again, these are all from the 2014 touring parts book, I can assure you these will fit 14 models since we know that touring fenders interchange among models of like year (frame the same) and the 2014 book is calling out 2009 (Canada) and 2010 (US) part numbers for the street glides.
Looking at the 2014 street glide for both the US and Canada (still uses the 3 light setup) you get the following part numbers for a rear fender in primer:
US 60575-10
CAN 59731-09
Fascia p/n
59739-09
Again, these are all from the 2014 touring parts book, I can assure you these will fit 14 models since we know that touring fenders interchange among models of like year (frame the same) and the 2014 book is calling out 2009 (Canada) and 2010 (US) part numbers for the street glides.
#10
It will - IF you are either Canadian or wanting to back date to the 3 light setup, which some have done for better visability...........often times to use a BAL light.