Coastal Moto Maverick wheels and tires 21/18
#11
09-12-2013, 01:50 AM
#12
09-12-2013, 02:37 PM
Talked to coastal moto. Looks like the way to go would be to run the 2008 axles and spacers. or purchase these harley wheel bearing and spacer kits (43848-08 00-07 Touring FRONT) (43861-08 00-07 Touring REAR) and u can slap these right on (minus the rotor issue) using your axles
As far as the rotors go, the only option if u dont want to turn them down is to buy new rotors.... Use your stock rotors, or buy some takeoff brembo calipers and slap them on. The fork spacing should be no different, but i do have a set of 2008 stock lower legs laying around also if ya wanted to swap the entire lower front end.
As far as the rotors go, the only option if u dont want to turn them down is to buy new rotors.... Use your stock rotors, or buy some takeoff brembo calipers and slap them on. The fork spacing should be no different, but i do have a set of 2008 stock lower legs laying around also if ya wanted to swap the entire lower front end.
Last edited by WhiteGoldSG; 09-12-2013 at 03:49 PM.
#13
09-13-2013, 05:44 PM
#14
09-16-2013, 01:25 PM
#15
09-18-2013, 12:11 AM
#16
09-19-2013, 08:15 PM
Tourer
#17
09-24-2013, 12:01 AM
Thread
Thread Starter
Forum
Replies
Last Post
WanaRyd Wheels
Vendor For Sale Classifieds
7
08-07-2012 08:53 AM