Cleaning the shop again!
#1
12-09-2012 | 04:57 PM
Thread Starter
|
Tourer
Joined: May 2007
Posts: 259
Likes: 0
From: Newton, KS
Cleaning the shop again!
I have a mix of things that have been sitting around and need a new home. All prices will include shipping in the CONUS. To many small things so I took a "group" picture so pm me as i have individual ones as well.
Kuryakyn Mellow baffles. Part #503 and fit crusher 490 and 491 mufflers. Used but in nice shape. Baffle plugs have been drilled out to 1/2 inch from stock 1/8th inch. $75 SOLD
Stock 2010 oilpump with approx. 1800 miles in good condition. would be an upgrade to the pre-2007 (except 2006 dyna) twin cams but would also have to upgrade your camplate as well. This was a from a friends bike and have already sold the camplate. Part # 26037-06. $40
Stock 2009 primary chain tensioner with approx. 26,000 mi. Works fine and shows some wear as to be expected but still usable as is. Not sure when they went to the -06A part number. Part# 39929-06A $15
Stock 2009 RKC shifter linkage in fair condition: $10
Stock 2009 cast breather assemblies with like new cometic metal gaskets, umbrealla valves, etc. (only run at idle before taking them out). Part#17685-03. $15
Crank position sensor off a 2006 sportster. Thought this was the problem a couple years ago with my sporty but it wasnt and I left the new one in the bike when I sold it so it does work. Part# 32712-06. $15
Harley men's Racetrack Performance eyewear in good condition. I think I still have the microfiber bag as well. Part# 98208-07V. $20
Stock 2009 RKC clips and lower pushrod tubes in nice condition. $10
Klock Werks revolver baffles without packing. Recieved these in a set of there WFB slip-ons and the kindly sent me the correct ones. The baffles are for 4" muffler bodies but unlike most baffles these are clamped onto the headpipe inside the inlet part of the muffler so these will not fit regular 1 3/4" mufflers without modification but they may work adapting 2" inlet mufflers to standard 1 3/4" headpipes. The inlet of the baffles is just under 1 7/8" and the baffle is 2" spiral core and overall length is approx 25". Would like just $15 but not sure on shipping for these so will say $30 and if shipping is less I will refund the difference.
Cycle shack M pipe baffles. These I have had for several years and came out of a set of M slach cut pipes for my shovelhead. They have been modified but should fit any 2 1/2" M pipe cycle shack makes if you can remove the baffles. $20
Stock Harley 103 airfilter cover. New 103 trim ring as original one had a "tiny" dent in it. I have the reciept and box for proof. Firm at $25
Kuryakyn Trident crusher muffler tip with all bolts. Ok condition overall but has a few scrapes on the top of it. Should fit any Trident crucher muffler. Part#492. $15
Road King windshields only. Stock 20" and a 16". Stock one is in nice condition but the 16" is only fair (has a decent mark from previous owner letting clutch cable rest against it). I only have one box that will fit these so I'd like to sell them together. Asking $40 shipped for both.
Well that's it for now. Let me know if you have questions and shout me an e-mail and I will send more pics of what you are interested in. Thanks, Jake.
Kuryakyn Mellow baffles. Part #503 and fit crusher 490 and 491 mufflers. Used but in nice shape. Baffle plugs have been drilled out to 1/2 inch from stock 1/8th inch. $75 SOLD
Stock 2010 oilpump with approx. 1800 miles in good condition. would be an upgrade to the pre-2007 (except 2006 dyna) twin cams but would also have to upgrade your camplate as well. This was a from a friends bike and have already sold the camplate. Part # 26037-06. $40
Stock 2009 primary chain tensioner with approx. 26,000 mi. Works fine and shows some wear as to be expected but still usable as is. Not sure when they went to the -06A part number. Part# 39929-06A $15
Stock 2009 RKC shifter linkage in fair condition: $10
Stock 2009 cast breather assemblies with like new cometic metal gaskets, umbrealla valves, etc. (only run at idle before taking them out). Part#17685-03. $15
Crank position sensor off a 2006 sportster. Thought this was the problem a couple years ago with my sporty but it wasnt and I left the new one in the bike when I sold it so it does work. Part# 32712-06. $15
Harley men's Racetrack Performance eyewear in good condition. I think I still have the microfiber bag as well. Part# 98208-07V. $20
Stock 2009 RKC clips and lower pushrod tubes in nice condition. $10
Klock Werks revolver baffles without packing. Recieved these in a set of there WFB slip-ons and the kindly sent me the correct ones. The baffles are for 4" muffler bodies but unlike most baffles these are clamped onto the headpipe inside the inlet part of the muffler so these will not fit regular 1 3/4" mufflers without modification but they may work adapting 2" inlet mufflers to standard 1 3/4" headpipes. The inlet of the baffles is just under 1 7/8" and the baffle is 2" spiral core and overall length is approx 25". Would like just $15 but not sure on shipping for these so will say $30 and if shipping is less I will refund the difference.
Cycle shack M pipe baffles. These I have had for several years and came out of a set of M slach cut pipes for my shovelhead. They have been modified but should fit any 2 1/2" M pipe cycle shack makes if you can remove the baffles. $20
Stock Harley 103 airfilter cover. New 103 trim ring as original one had a "tiny" dent in it. I have the reciept and box for proof. Firm at $25
Kuryakyn Trident crusher muffler tip with all bolts. Ok condition overall but has a few scrapes on the top of it. Should fit any Trident crucher muffler. Part#492. $15
Road King windshields only. Stock 20" and a 16". Stock one is in nice condition but the 16" is only fair (has a decent mark from previous owner letting clutch cable rest against it). I only have one box that will fit these so I'd like to sell them together. Asking $40 shipped for both.
Well that's it for now. Let me know if you have questions and shout me an e-mail and I will send more pics of what you are interested in. Thanks, Jake.
Last edited by Jake72; 12-30-2012 at 04:14 PM.
#7
12-12-2012 | 06:42 PM
Thread Starter
|
Tourer
Joined: May 2007
Posts: 259
Likes: 0
From: Newton, KS
