Gloss Black 4pt docking hardware, sissy bar, and pad
#1
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
SOLD...thanks Braiden!
I just bought a tour pak. I plan to use the rigid mount so I'm selling the gloss black 4-point docking hardware, the detachable sissy bar and backrest pad from an '09 Road Glide.
From Harley's site:
docking kit 54246-09 $150
sissy bar 54247-09 $180
pad 52886-98C $100
New TOTAL $480
No bites at $350; I'll take $300 (via PayPal) shipped.
The triangle mounting portion of the detachable sissy bar is actually a separate piece and has a small nick (1/4") out of the powder coating (it was stuck to the bubble wrap when I bought it new). I also have a chrome triangle mounting piece too that comes with the pad. The nick is on the top edge as shown in the photo.
I just bought a tour pak. I plan to use the rigid mount so I'm selling the gloss black 4-point docking hardware, the detachable sissy bar and backrest pad from an '09 Road Glide.
From Harley's site:
docking kit 54246-09 $150
sissy bar 54247-09 $180
pad 52886-98C $100
New TOTAL $480
No bites at $350; I'll take $300 (via PayPal) shipped.
The triangle mounting portion of the detachable sissy bar is actually a separate piece and has a small nick (1/4") out of the powder coating (it was stuck to the bubble wrap when I bought it new). I also have a chrome triangle mounting piece too that comes with the pad. The nick is on the top edge as shown in the photo.
Last edited by DougM; 08-25-2010 at 09:56 AM. Reason: lower price
#3
#4
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Additional photos and answers to a PM:
The parts have been on the bike for just over a year. The docking hardware is in very nice condition; probably an 8.5 or 9 out of 10. The flash may have made them look all scratched up but they aren't.
I took more photos without a flash. The finish is a real deep black powder coat. There are no scratches that go through the finish. In just the right light you can see some swirl type marks like you get with black paint. There is one area that is really more marred than scratched near the middle bolt about an 1" long. You have to tilt the part in the light just right to see it.
The parts have been on the bike for just over a year. The docking hardware is in very nice condition; probably an 8.5 or 9 out of 10. The flash may have made them look all scratched up but they aren't.
I took more photos without a flash. The finish is a real deep black powder coat. There are no scratches that go through the finish. In just the right light you can see some swirl type marks like you get with black paint. There is one area that is really more marred than scratched near the middle bolt about an 1" long. You have to tilt the part in the light just right to see it.
#5
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
DougM; a little dot of gloss black model paint will touch-up that nick nicely...I have the same set on my 09 FLHX. So, for anyone interested in buying, it's not any type of major flaw to correct & it sinks into the pad when mounted - won't even notice it. Good luck w/the sale - black is hard to come by (I waited 2-months for backorder).
Thread
Thread Starter
Forum
Replies
Last Post