2010 Harley Street Glide wheel's...
#11
I was asking $300 but dropped my price to $250 to make the sale for you...shipping will be at $50 for the rear wheel with weight and size...it does have the abs bearings...paypal as personal so no fee's removed and I'll do for you $240...fair enough... let me know and will pm you paypal info...
#13
abs bearing do not need to be changed out to work with non-abs bike...also I do have a non -abs rear wheel...I thought you needed abs because you inquired on this wheel with abs bearings...let me know if the non -abs wheel works for you...thx for asking...
Last edited by ny2az; 08-25-2010 at 05:31 PM.
#14
ABS, I know they're about a half inch wider, maybe a spacer would work
What year and miles do they have, price ?
What year and miles do they have, price ?
#15
I went out and did confirm that the abs bearing is an 1/8 " wider than the non-abs bearing...non-abs bearing wheel measured 6 5/16" and the abs bearing wheel measured 6 7/16"...I don't know if it's as simple as buying the correct spacer or cutting the stock spacer down to make it work...but I do know you don't have to buy the kit for $70...thats both bearings...all you have to do is change out the one bearing to non-abs......but in any case they are different...
as to the other wheel... 2009 non abs bearing wheel with around 1000 miles....I'll do $225 shipped on either wheel...abs or non...you let me know if either work for you...
Last edited by ny2az; 08-25-2010 at 10:15 PM.
#16
I did some checking and I believe a slimmer spacer on the brake side will work, so I'll take the 2010 for $225. The 09 tires had a cupping problem. Both of mine did, but at least, Harley replaced my front tire.
One of my coffee buddies has a machine shop and he said he'll cut the spacer down for me, if I can't find one to fit.
Send me your Paypal and I send payment. I never sent a personal, but I'll see how that goes. If there's any confusion, I let you know.
Please PM me a number, in case I have to contact you, thanks, Gary
One of my coffee buddies has a machine shop and he said he'll cut the spacer down for me, if I can't find one to fit.
Send me your Paypal and I send payment. I never sent a personal, but I'll see how that goes. If there's any confusion, I let you know.
Please PM me a number, in case I have to contact you, thanks, Gary
Thread
Thread Starter
Forum
Replies
Last Post