I installed these for my daughter, and they worked perfectly! They fold back out of the way if you don't want to use them. I believe they are Kuryakyn #7926, and fit 93-06 baggers. Excellent condition. $110.00 SHIPPED conus. Postal money order only.
THANKS FOR LOOKING
Bump means just that, you're bumping it back to the top so when others come on here and search "New Posts", it will be towards the top and not forgotten.
I installed these for my daughter, and they worked perfectly! They fold back out of the way if you don't want to use them. I believe they are Kuryakyn #7926, and fit 93-06 baggers. Excellent condition. $110.00 SHIPPED conus. Postal money order only.
THANKS FOR LOOKING
Since we're not sure about the part number.. Would you measure the width that it slides over the OEM bracket? I have chrome brackets that look different that the stock black ones. Mine is the one on the right.
If they are the ones that fit the stock black brackets they will fit even 09's. I took a set off my 05 ultra and put them on my 09 Road Glide, no problems. But they will not fit chrome brackets.
The width of the opening at the top of the peg bracket is 29/32". The floorboard bracket tapers smaller as it goes toward the bike, and the bracket on the pegs is open on the bike side, so there is a little "in and out play". The top of the flat (peg) on the bike side measures 3/4". If you slide the clamp tight, it measures 1/2" (vertical), so your mount brackets need to be over 1/2" thick to get them to clamp. They could easily be shimmed though.
Hopefully this and the picture answers your question, but if not, ask again!!