Mark this thread as Unsold
Black Heavy Breather from 2017 FLHTK
#3
I actually did like it when the bike was in warranty mode, and it was all Harley, Stage III. I didn't have it long, when I modified it for an external breather. Then, at 333 miles, the piston oiler jets backed out, engine blew. I had to buy another setup to get a cover on it that wasn't modified lol. Hence the reason I have a filter and intake, as well as a complete setup. Ive since gone with a RS468 cam, and I used a DK a/c to get the external breather I wanted. Probably more than u wanted to know lol
#5
I actually did like it when the bike was in warranty mode, and it was all Harley, Stage III. I didn't have it long, when I modified it for an external breather. Then, at 333 miles, the piston oiler jets backed out, engine blew. I had to buy another setup to get a cover on it that wasn't modified lol. Hence the reason I have a filter and intake, as well as a complete setup. Ive since gone with a RS468 cam, and I used a DK a/c to get the external breather I wanted. Probably more than u wanted to know lol
#7
The intake bolts to a cover that the breather head bolts go thru. See pic above, it's the cover with the 2 big holes in it. Also, pic below, its the 2 smaller hoses you see drop down to the breather filter. Basically, that's how I had mine. So on the first cover I had, I drilled and tapped houses into the cover, dropped them down to a catch can. Worked great, till the motor blew up from the piston oiler jets backing out with the torque spec changing on the '17s.
Last edited by BlkHillsBagger; 07-10-2020 at 07:42 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gead
Milwaukee Eight (M8)
86
03-10-2020 04:17 PM