Touring Parts This is the place to post your Touring Parts for sale. DO NOT POST WTB THREAD HERE.

Screamin eagle pro cnc twin cooled heads

Thread Tools
 
Search this Thread
 
  #1  
Old 05-07-2018 | 01:42 AM
Clayton24's Avatar
Clayton24
Thread Starter
|
Club Member
Joined: Aug 2017
Posts: 551
Likes: 42
From: Coal grove ohio 45638
Default Screamin eagle pro cnc twin cooled heads

i have for sale a slightley used set of screamin eagle pro cnc heads for a 14-16 twin cooled harley like an ultra limited. Ready to bolt on thanks $650.00 obo



 
  #2  
Old 05-07-2018 | 12:52 PM
bteski's Avatar
bteski
Tourer
Joined: Nov 2012
Posts: 374
Likes: 10
From: apalachicola
Default

Do you have a part #, And do you have a pic of the intake port.
Thx
 
  #3  
Old 05-07-2018 | 03:57 PM
Revmaster T's Avatar
Revmaster T
Intermediate
Joined: Nov 2014
Posts: 40
Likes: 0
From: Tampa, Florida
Default

Why did you take them back off ?
 
  #4  
Old 05-07-2018 | 04:55 PM
Clayton24's Avatar
Clayton24
Thread Starter
|
Club Member
Joined: Aug 2017
Posts: 551
Likes: 42
From: Coal grove ohio 45638
Default

Originally Posted by bteski
Do you have a part #, And do you have a pic of the intake port.
Thx
part# is 16500208


 
  #5  
Old 05-07-2018 | 05:00 PM
Clayton24's Avatar
Clayton24
Thread Starter
|
Club Member
Joined: Aug 2017
Posts: 551
Likes: 42
From: Coal grove ohio 45638
Default

Originally Posted by Revmaster T
Why did you take them back off ?
cause oil was going thru one guide so i had all new tapered guides put in but in the process before they where done i bought a diffrent set of stage 2 dragos heads so i used them these heads are now better then new in my opinion ! Thanks
 
  #6  
Old 05-10-2018 | 07:26 AM
Clayton24's Avatar
Clayton24
Thread Starter
|
Club Member
Joined: Aug 2017
Posts: 551
Likes: 42
From: Coal grove ohio 45638
Default

To the top
 
  #7  
Old 05-10-2018 | 09:43 AM
WhereduGo?'s Avatar
WhereduGo?
Cruiser
Joined: Mar 2013
Posts: 154
Likes: 1
From: CT
Default

I wonder if these can be filled and used on a non water headed bike ?
 
  #8  
Old 05-10-2018 | 09:50 AM
Clayton24's Avatar
Clayton24
Thread Starter
|
Club Member
Joined: Aug 2017
Posts: 551
Likes: 42
From: Coal grove ohio 45638
Default

Originally Posted by WhereduGo?
I wonder if these can be filled and used on a non water headed bike ?
i would think so and they may work as is due to the volume of the water jackets being small it only loops around the exhaust ports but its realy hard to say about hot spots etc.
 
  #9  
Old 05-10-2018 | 01:50 PM
32roadking's Avatar
32roadking
Stellar HDF Member
Joined: Feb 2008
Posts: 2,438
Likes: 25
From: Huntington Beach, Ca
Default Dyno run

Did you do any Dyno runs with these heads? If so how much power. Thanks
 
  #10  
Old 05-10-2018 | 03:44 PM
Clayton24's Avatar
Clayton24
Thread Starter
|
Club Member
Joined: Aug 2017
Posts: 551
Likes: 42
From: Coal grove ohio 45638
Default

Originally Posted by 32roadking
Did you do any Dyno runs with these heads? If so how much power. Thanks
no never made it to that but fwiw its the same heads that comes in a tire shredder kit .
 


Quick Reply: Screamin eagle pro cnc twin cooled heads



All times are GMT -5. The time now is 10:30 PM.