Garage Sale
#1
I decided to clean out part of the attic above my garage and sell some of the stuff taking up space. All parts came off a 2009 Streetglide or a 2012 Roadglide and are used and as is. All prices are without shipping and are negotiable, to a point. :-)
Stock HD 103 Derby Cover $20
Stock HD 103 Air Cleaner Football - $50
Stock HD Streetglide seat - $50
C&C Solo seat with gel insert, backrest and passenger pillion - $400
Pro One Mirrors - $75 for set
Nasty Hogz CVO Fender (Denim Black) with CBC Wiring Harness and Lic Plate Light. If you've priced this up you know you're looking about $750 asking $300
**** This is for a 2014 and up. I just used it for a 2012 and that's what wiring harness is attached. *****
Here's the deal with this. I installed it and rode it around before I realized that my aftermarket tire and rim combo was quite a bit wider than stock and rubbed on the mounting studs and inside of fender.
The fender itself needed to be trimmed to fit with my docking hardware, and then it rubbed on the inside of both sides and the top. There is damage, however it's all on the inside and can't be seen from the outside. I'm adding a bunch of pictures, including one with it installed with no bags, so you can see it looks fine installed. Before you buy this, if there are any additional pictures you want please let me know. I want you to see exactly what you get. Unfortunately, I put the stock fender back on as I hated having to put the stock wheel on for the clearance issues.
Stock HD 103 Derby Cover $20
Stock HD 103 Air Cleaner Football - $50
Stock HD Streetglide seat - $50
C&C Solo seat with gel insert, backrest and passenger pillion - $400
Pro One Mirrors - $75 for set
Nasty Hogz CVO Fender (Denim Black) with CBC Wiring Harness and Lic Plate Light. If you've priced this up you know you're looking about $750 asking $300
**** This is for a 2014 and up. I just used it for a 2012 and that's what wiring harness is attached. *****
Here's the deal with this. I installed it and rode it around before I realized that my aftermarket tire and rim combo was quite a bit wider than stock and rubbed on the mounting studs and inside of fender.
The fender itself needed to be trimmed to fit with my docking hardware, and then it rubbed on the inside of both sides and the top. There is damage, however it's all on the inside and can't be seen from the outside. I'm adding a bunch of pictures, including one with it installed with no bags, so you can see it looks fine installed. Before you buy this, if there are any additional pictures you want please let me know. I want you to see exactly what you get. Unfortunately, I put the stock fender back on as I hated having to put the stock wheel on for the clearance issues.
Last edited by ChickinOnaChain; 03-13-2018 at 07:32 PM.
#5
I'm not sure, I'll have to measure it when I get home from work. I'm stuck here for about 36 hours so it will be early evening Wednesday when I can measure it and get back to you.
I'm not sure, I'll have to measure it when I get home from work. I'm stuck here for about 36 hours so it will be early evening Wednesday when I can measure it and get back to you.
However the Pro One site lists the stem as 6 1/2" by 3" so I'm guessing that is the rise and seems pretty close as I remember it. The part# of the mirrors are 102410B and 102430B, in case that helps.
I'm not sure, I'll have to measure it when I get home from work. I'm stuck here for about 36 hours so it will be early evening Wednesday when I can measure it and get back to you.
However the Pro One site lists the stem as 6 1/2" by 3" so I'm guessing that is the rise and seems pretty close as I remember it. The part# of the mirrors are 102410B and 102430B, in case that helps.
Last edited by ChickinOnaChain; 03-13-2018 at 07:33 PM.
#7
Trending Topics
#10