Mark this thread as Unsold
LRS Road King Elite - 18" or 20"
#1
LRS Road King Elite - 18" or 20"
I have two basically new Long Ride Shields for the Road King.
It's the Elite model - I have one both in 18" and 20" version.
Both are clear. Both have been tried on the bike, but ridden <50 miles. Original box and clear wrap.
Looking for $75 (for either one) shipped in the continental US. Saves you about $40-60 - my loss your gain.
It's the Elite model - I have one both in 18" and 20" version.
Both are clear. Both have been tried on the bike, but ridden <50 miles. Original box and clear wrap.
Looking for $75 (for either one) shipped in the continental US. Saves you about $40-60 - my loss your gain.
#2
I have two basically new Long Ride Shields for the Road King.
It's the Elite model - I have one both in 18" and 20" version.
Both are clear. Both have been tried on the bike, but ridden <50 miles. Original box and clear wrap.
Looking for $75 (for either one) shipped in the continental US. Saves you about $40-60 - my loss your gain.
It's the Elite model - I have one both in 18" and 20" version.
Both are clear. Both have been tried on the bike, but ridden <50 miles. Original box and clear wrap.
Looking for $75 (for either one) shipped in the continental US. Saves you about $40-60 - my loss your gain.
#3
To answer some questions received:
- Both shields are without flaws, and both have the recurve
- The actual height of the shield (from the apex of the top to the apex of the cutout) is approx. 1/2 an inch shorter than the 'list'
18" shield = 17.5" height
20" shield = 19.5" heigh (same as stock)
This is standard for LRS and other manufacturers. Showing a pic of the 18" shield with a tape measure for reference below...
- Both shields are without flaws, and both have the recurve
- The actual height of the shield (from the apex of the top to the apex of the cutout) is approx. 1/2 an inch shorter than the 'list'
18" shield = 17.5" height
20" shield = 19.5" heigh (same as stock)
This is standard for LRS and other manufacturers. Showing a pic of the 18" shield with a tape measure for reference below...
Thread
Thread Starter
Forum
Replies
Last Post
houstonhdguy
Want To Buy Motorcycles/Parts/Accessories
1
11-16-2013 09:39 AM