Mark this thread as Unsold
Screamin' Eagle Street Cannons
#1
Screamin' Eagle Street Cannons
Selling a pair of Screamin' Eagle Street Cannon slip-on mufflers (H-D part #64900186A) with billet slash tapered end caps (H-D part #65100018). Fits most '09-'16 Touring models (be sure to verify fit for your bike). These mufflers have less than 1000 miles on them and are in very good condition. Asking $275, which includes shipping within the continental U.S.
#3
These came off a 2009 Ultra Classic. Actually, after I put in new cams, they were a little too loud for me when accelerating or under load (just fine a cruising speed). I went with a set of Kuryakyn Crusher Mellows, which sound just about right to me.
The following users liked this post:
Erilflynn (04-04-2017)
#4
Yes I heard they are quiet and sound good unless you decatt, change the head pipe or other mods like yours. How were they before the cam update?
#5
I was pretty happy with them before the new cams. The 2009's still had the cat-less headers (except CA models), so they were always a little louder for me than they would have been on a stock 2010 and up. They're EPA sound compliant when installed on an otherwise stock bike. They have the EPA compliance stamp on the bottom of each muffler. Good, low rumble at idle and cruise, with some bark on acceleration. They have a straight-through perforated baffle that's wrapped (fiberglass, I think). The baffle diameter appears to be about 1.5 inches, although I never measured it.
#6
So when you say these have 1,000 miles on them do you mean YOU put 1,000 on or total including any previous owner (or are you the only owner)? Thanks for your patience.
#7
I'm the only owner of them. I purchased them brand new last year from an H-D dealership that does online sales.
Trending Topics
#8
Thanks for answering all my questions. Wasn't really looking for some slip ons for my new '16 SGS but I am trying to set it up the way I want it. Eventually I am going to want some.
#9
hi! are these still available, and any idea if they will fit a 2015 Street Glide with stock headers? i did a quick search for the part number on hd website but haven't found them yet.
#10
Yes, still available. I think H-D has gone to a B revision of them since I bought them, so use the same part number, but replace the A with B. Don't know what changed in the revision. These should fit a 2015 Street Glide. The only exceptions I've seen mentioned are CVO models and 2010 FLHX and FLTRX.