V & H Big radius pipes. Chrome.
#1
01-25-2016 | 08:37 AM
Thread Starter
|
Cruiser
Joined: May 2013
Posts: 142
Likes: 0
From: Grand Haven, Mi.
V & H Big radius pipes. Chrome.
Taking these off a 2006 street glide.
They're in good shape, not perfect. Few scuffs here and there.
The lower heat shield has a gouge in it from the passenger foot peg mount.
Long story, but the guy who installed them, had the upper and lower shields switched.
So, the peg mount hit it.
But, now installed correctly, you cannot see it at all, as the pipes are so close together.
Pipes, shields, and mounts. No flanges.
$400 , shoot me an offer. Don't want them sitting collecting dust.
They're in good shape, not perfect. Few scuffs here and there.
The lower heat shield has a gouge in it from the passenger foot peg mount.
Long story, but the guy who installed them, had the upper and lower shields switched.
So, the peg mount hit it.
But, now installed correctly, you cannot see it at all, as the pipes are so close together.
Pipes, shields, and mounts. No flanges.
$400 , shoot me an offer. Don't want them sitting collecting dust.
#2
02-06-2017 | 09:24 PM
Advanced
Joined: Feb 2017
Posts: 61
Likes: 23
From: San Diego
Taking these off a 2006 street glide.
They're in good shape, not perfect. Few scuffs here and there.
The lower heat shield has a gouge in it from the passenger foot peg mount.
Long story, but the guy who installed them, had the upper and lower shields switched.
So, the peg mount hit it.
But, now installed correctly, you cannot see it at all, as the pipes are so close together.
Pipes, shields, and mounts. No flanges.
$400 , shoot me an offer. Don't want them sitting collecting dust.
They're in good shape, not perfect. Few scuffs here and there.
The lower heat shield has a gouge in it from the passenger foot peg mount.
Long story, but the guy who installed them, had the upper and lower shields switched.
So, the peg mount hit it.
But, now installed correctly, you cannot see it at all, as the pipes are so close together.
Pipes, shields, and mounts. No flanges.
$400 , shoot me an offer. Don't want them sitting collecting dust.
Thread
Thread Starter
Forum
Replies
Last Post