DK Premium Breather Kit install with pics
#13
no, i would like to route the breather system to the outside of the air box and to the ground.
#14
I ran the breather line to just under the frame. I got the DK round breather kit with vented bolts but when the bike got hot you could smell oil and the vented bolts felt wet. Ordered the kit to run a breather line and bought some black gas line from the auto store. Been a couple years and I like it. Don't forget the Locktite.
Alan
Alan
#15
#16
Update! I did read the supplied instructions but found the online instructions recommend an 8 mm! I may have been reading the wrong supplied instructions due to ordering multiple items (complete air cleaner kit with stealth breather set up?
Last edited by guapodog; 10-06-2017 at 08:11 PM.
#17
I bought the DK kit with the catch can. Both tubes run around the air filter and the T to the catch can. Nice and clean. I run a Kury Ally Cat air cleaner and just plugged the breather holes with pop rivets.
The bike pings less when it's hot out and runs like a top. And no more drips from the air cleaner. I love this setup and it was worth every penny! I highly recommend it! That and DK really is a class act.
The bike pings less when it's hot out and runs like a top. And no more drips from the air cleaner. I love this setup and it was worth every penny! I highly recommend it! That and DK really is a class act.
#18
Breather
On my road king I bought rubber pugs at Home Depot that fit into the mounting hole were the fitting is and just drilled a 7/16 hole through the plug and put it on the fitting and ran two lines,NO T's used at all and run into atmosphere,a lot of condensation comes out glad I did mine
Thread
Thread Starter
Forum
Replies
Last Post
CJeep
2014-2023 Touring Models
23
02-15-2019 01:30 PM