Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

08 SG..redo #3...26" with a turbo 120R

Thread Tools
 
Search this Thread
 
  #21  
Old 05-10-2014 | 09:10 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

Got rid of the cig lighter and replaced with a set of Hertz SPL ST35 horn tweeters. need all my gauges, so this was the best place for them. gotta do a little bit of carbo fill above the area where the cig lighter was, but otherwise, fit perfect...also filling in the old clutch hole since im running internal hydro clutch line.



 
  #22  
Old 05-10-2014 | 09:11 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

Frame being smoothed and body worked to perfection



 
  #23  
Old 05-10-2014 | 09:12 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

frame when it was in primer getting ready for the new paint




and my new gauges
 
  #24  
Old 05-10-2014 | 09:14 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

BTW...it will no longer be White Gold Pearl.....still white....still pearl...but no gold...unless it wins one!!!




 
  #25  
Old 05-10-2014 | 09:15 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
  #26  
Old 05-10-2014 | 09:16 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

frame back from paint...ready to start pulling wires and reassembly






 
  #27  
Old 05-10-2014 | 09:17 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
  #28  
Old 05-10-2014 | 09:18 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

Pulled all wire, air, and hydro lines through the frame today


 
  #29  
Old 05-10-2014 | 09:20 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

Started reassembly of the motor, just waiting on my fueling highflo oil pump to get back from fueling service... When I tore it all down the pumps gerators had some fine scoring on them.. Wanna make sure everything is as good as new for this turbo setup... As soon as i get the pump back and put the cams and rockers in, this beast will be back in the frame and ill start hanging a big ol turbo off her side!!!






 
  #30  
Old 05-10-2014 | 09:23 PM
WhiteGoldSG's Avatar
WhiteGoldSG
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,017
Likes: 2
From: New Jersey
Default

thats it for now...should have the motor back in the frame by wed and Ill post more pics then... thx for looking guys...I know its not every ones style, but its not my everyday bike, and ive never seen a money car following the flower car...have you???
 


Quick Reply: 08 SG..redo #3...26" with a turbo 120R



All times are GMT -5. The time now is 09:16 PM.