So I picked up a 2011 wheel with chrome rotors
and abs bearing.

I am gonna replace the 21" spoke cause I am tired of messing with that wheel.

Now I know its been covered but wanna make sure I am right here...

I will need a 08 and up axle
new non abs bearings
08 and up axle spacers
I will run my single sided rotor so I will switch my 07 rotor over to the new wheel.

Am i missing anything?

 

Anyone?

 

So can anyone confirm this with part numbers or anything?

 

I would also like to know cause I want the ultima 21" for my 2012 sg

 

I was able to source the 25mm renegade hidden axle, 25mm bearings and spacers from Hogpro. Drew helped out a bunch. He even got back with me after checking with his technicians after a question regarding the bearings. Highly recommend those guys.
On another note I am just waiting to buy a new front tire and I am in business on this swap.

 

So can I assume that the same wheel you have ( ultima) will not fit a 2012?

 

I dont know. I would check with a wheel specialist. Bearings are definately different as my ultima is 1"

 

You have a 1" axle on your bike now. You need a 25mm axle. I have a complete axle for sale (washer, nut, spacers). Shoot me a PM if you are interested.