27000 miles with no issues. If I was going to scrap them the 3 or 4 times through the dragon would have done it, but no problem.

 

Love mine.

 

Scrap or scrape?

I have had mine on for about 12k and I have scraped them on my stock king. Just was looking at the marks on the back end of the x cover when I changed the oil the other day. To be honest, I can't pinpoint when...might have done it when I thought I had scraped floorboards. Whatever it was, it was no more noticeable than scraping the floorboards.

 

Have them on my 13 limited and I love the pipe. Very good quality and good performance. If your going to run a tuner with wide band o2 sensors get the pipe for a 09 bagger. That's what I did as I put a thundermax on at the same time. Only time I've scraped is 2 up. As some have brought up make sure the bottom clamp is faced so the excess thread isn't hanging straight down, could cause that bottom bracket to damage the oil pan. I say go for it, it's a great pipe! Careful installing the final "x" heat shield, it's easy to scratch the other shields when you push it on. Good luck!

 

Will be getting these soon, glad to hear all the positives here, thanks