ironhead
#2
RE: ironhead
I've seen them on Ebay motors used and my best recollection is around $1500.00
A fellow had 1 of these, I think is a classic look for a sidecar.
http://www.imz-ural.com/sidecar/
A fellow had 1 of these, I think is a classic look for a sidecar.
http://www.imz-ural.com/sidecar/
#3
RE: ironhead
If you wanted to consider a project, here's 1 at $365.00. Ends in 8 hours.
http://cgi.ebay.com/ebaymotors/ws/eB...category=35568
Here's another that would be a real hoot!
http://cgi.ebay.com/ebaymotors/ws/eB...category=35604
http://cgi.ebay.com/ebaymotors/ws/eB...category=35568
Here's another that would be a real hoot!
http://cgi.ebay.com/ebaymotors/ws/eB...category=35604
#5
RE: ironhead
When you think about a side car, start thinking about engine work. They are heavy and catch a lot of wind, so stock engines are marginal. I have a friend with a 96 EG and sidecar(He has to have it because of a severely broken leg that healed too weak for regular riding). He is now planning to install a 100" S&S because with him, wife and sidecar there just isn't enough power to run interstate speeds without working the engine to death.
Just a consideration.
Regards,
Bill
Just a consideration.
Regards,
Bill
#6
RE: ironhead
Head over to the Sidecar Association web site. http://www.sidecar.com . They have lots of technical advise and sections where you can buy a rig or ask for one. I asked for one for around $750 and three folks contacted me. I should have my California Sidecar I in my hands within the next day or two. The guy split the shipping with me so shipping was 125 more from Louisiana.
Carl
Carl
Thread
Thread Starter
Forum
Replies
Last Post