New SE compensator for 2014
#11
I'm gonna sit back and wait on this update. My bike is running great.
Sure do like your Electra Glide Standard.
I had a 08 model
Put a Supertrapp supermeg 2in1 pipe on it. Thunder-Max.
High flow air kit and did a 103 to it.
Great running bike.
Wound up puttin a Tourpack on it. Liked it even more.
Sure do like your Electra Glide Standard.
I had a 08 model
Put a Supertrapp supermeg 2in1 pipe on it. Thunder-Max.
High flow air kit and did a 103 to it.
Great running bike.
Wound up puttin a Tourpack on it. Liked it even more.
I have the standard SE compensator that I put on 2 years ago. No noise and seems to work good, but I plan to put in the newest version this winter or spring. I want the primary bulletproof, even if the engine is basically stock.
#12
Again, thanks guys for the input and pictures. Once I got home and was able to do a more in depth research I see how it all comes together with this new Compensator. I actually like the design. I will need to come up with a good epoxy as I said dealer does'nt have adhesive and does not know when they might get it in.
#13
Again, thanks guys for the input and pictures. Once I got home and was able to do a more in depth research I see how it all comes together with this new Compensator. I actually like the design. I will need to come up with a good epoxy as I said dealer does'nt have adhesive and does not know when they might get it in.
I hear you can also buy a 2014 primary cover. It already has a metal trough made on the cover. Know it will cost more also.
#14
#15
#16
Join Date: Feb 2009
Location: In your head rent free
Posts: 5,534
Received 5,293 Likes
on
1,585 Posts
This is a Harley PDF
Gives part #s, instructions etc.
http://www.harley-davidson.com/en_US...ts/-J05674.pdf
Gives part #s, instructions etc.
http://www.harley-davidson.com/en_US...ts/-J05674.pdf
#17
HD's Compensator glue:
http://www.lord.com/products-and-sol...oduct.xml/1625
http://krayden.com/tds/lord_maxlok_mx_tds.pdf
http://www.lord.com/products-and-sol...oduct.xml/1625
http://krayden.com/tds/lord_maxlok_mx_tds.pdf
Last edited by The Q; 12-17-2013 at 09:03 PM.
#18
#19
Call me a little bit skeptical on this "new & improved" compensator assembly. Harley has known about the lack of lubrication for a good many years. As a result they have come up with (as of 2014 models) 3 separate improved versions. Each was supposed to alleviate the previous lack of lubrication in earlier versions. The first couple of them didn't do anything except remove money from my wallet and transfer it into the coffers of the MOCO and the local stealer. Screw me once, shame on you. Screw me 2 or 3 times, shame on me.
Experience has taught me that it is too early to tell if they really have fixed this or this is just another futile shot in the dark by their inexperienced engineering dept. I'll bet they farmed this out to somebody out of house to fix. This ain't the moon rover guys, its just a few pieces of metal that gall due to lack of oil. How many years should it take to get it right?
Experience has taught me that it is too early to tell if they really have fixed this or this is just another futile shot in the dark by their inexperienced engineering dept. I'll bet they farmed this out to somebody out of house to fix. This ain't the moon rover guys, its just a few pieces of metal that gall due to lack of oil. How many years should it take to get it right?
#20