Not Sure If you look at the harley Part number it states that on certain models you will need to change the "Crash bar" to make the fit i know that on the 2014 models they will not fit
good luck
Bill
P/N 58854-05

 

UPDATE, UPDATE, UPDATE:
l've been inundated with PM's requesting pdf and part numbers for mounting hardware. This should answer all of that.

EDIT: CORRECT pdf link is posted below a few threads by TeeStu

Vivid Black Lower Vented Leg Fairings For Harley Touring Road King Electra Glide
Available on Ebay for $127 + $19 shipping, Just saw last night that they were reduced to $119 + Shipping. Make sure it says painted vivid black.

This might help, as it shows how to put them together:
http://www.harley-davidson.com/en_US...ts/-J03495.pdf i JUST SAW THAT THIS LINK ISN'T WORKING NOW. Maybe the MoCo decided too many folks were buying aftermarket lowers. Anyway, if you go to the HD Catalog, and look up their Lower Fairing Kits for Touring Models '83-2013 year models. Page 300-301 in the new HD Parts catalog. Part #58854-05. That's the part #for the unpainted set that Harley provides. Ask your dealer to print out the pdf that is associated with that number or any of the color matching #'s on page 301. The pdf is the same for all of them 83-2013. My apologies for the link NOT working. It worked a month ago, as I've got it printed out and sitting in front of me. But this will get you there. Maybe someone else here has a working link. UltraNutz did the same project, so you might try a PM to him as he probably won't see this.

2 3655A SCREW, PAN HEAD TORX @ $0.42 = $0.84 (#7 on drawing)
2 7415A WASHER, RUBBER @ $0.84 = $1.68 (#6 on drawing)
2 7576 NUT, FLANGE @ $0.84 = $1.68 (#8 on drawing)
4 7716 NUT, HEX FLANGE, FLHTC-UC @ $0.84 = $3.36 (#3 on drawing)
4 8175 BOLT, RETAINER @ $2.84 = $11.36 (#4 on drawing)
2 27048-84 CLAMP, CANNISTER @ $2.02 = $4.04 (#5 on drawing)
2 58104-05 COMPRESSION SPRING @ $4.50 = $9.00 (NOT on drawing)

Sub-Total: $31.96
Shipping: $9.99 (UPS)
Sales Tax: $0.00
lshd1 Total: $41.95
Lake Shore Harley Davidson.

 Or you can go the local Hardware store and buy the hardware for probably a quarter the cost. I wanted to make sure I had exactly what HD recommended, and it's turned out very good. There were a couple of extra washers and things that I deemed necessary, so I put them on, but this is the basic list of what you'll need.

 

It looks like everything you'd need to mount, but it certainly is NOT all you need to assemble the kit. You'll need hardware for assembly as well. See my post above for those part numbers, and that INCLUDEs mounting hardware as well. Quite a bit cheaper.

 

Yes, they will work on 2013 Street Glide.

 

BigSky here's the PDF:
http://www.harley-davidson.com/en_US...ts/-J03495.pdf

I'm still searching for info if these will work on a 13 Street Glide.....

 

We musta posted at the same time... Thanks

 

THANKS! Here it is for all those that need it. Crazy, I can't get this link to pull up in my post, and the exact link you've posted pulls up fine in your post. Guess I've been flagged. :=) Important thing is everyone has the information requested. Much appreciated. And yes I went back and checked to ensure they will fit on your 2013 Street Glide.

 

They look great!

Love the classic hot rod flames too!

 

Thanks Bigsky for the info. I just ordered the hardware (lshd1) and the Lowers kit (ebay). Guess I have to rethink my HD Crashbar mounted lights now. I also remember reading something about the floorboard extentions. Will they interfere with the lowers ??

 

I took my HD Crashbar mounted lights off to mount the Lowers. They're sitting on my work bench as we speak. I found that I just never really used them. You can see them mounted in my SIG Pic. Let me know if you decide you want em, I'll give you a good deal.