anyone ever bought these lowers?
#121
Didn't take the bike out after the mod but they are still snug. I would guess you could tighten the bolt to get the right balance of tightness/movability..
Last edited by Hammerhead Pat; 12-16-2013 at 01:55 PM. Reason: rewording
#123
#125
#128
ok I went back through the parts description and ordered only the following parts from LSHD1.com
2 3655A SCREW, PAN HEAD TORX @ $0.42 = $0.84 (#2 on drawing)
2 7415A WASHER, RUBBER @ $0.84 = $1.68 (#5 on drawing)
2 7576 NUT, FLANGE @ $0.84 = $1.68 (#6 on drawing)
4 7716 NUT, HEX FLANGE, FLHTC-UC @ $0.84 = $3.36 (#7 on drawing)
4 8175 BOLT, RETAINER @ $2.84 = $11.36 (#10 on drawing)
2 27048-84 CLAMP, CANNISTER @ $2.02 = $4.04 (#11 on drawing)
2 58104-05 COMPRESSION SPRING @ $4.50 = $9.00 (#12 on drawing)
Sub-Total: $31.96
Shipping: $9.99 (UPS)
Sales Tax: $0.00
lshd1 Total: $41.95
I don't think the screws part # 2995 (#1 in drawing) will be needed for speaker pods but if they are, screws are easy enough to find.
the local dealers around here man they won't cut you any slack whatsoever on parts prices.. And they wonder why their parts departments are always dead..
2 3655A SCREW, PAN HEAD TORX @ $0.42 = $0.84 (#2 on drawing)
2 7415A WASHER, RUBBER @ $0.84 = $1.68 (#5 on drawing)
2 7576 NUT, FLANGE @ $0.84 = $1.68 (#6 on drawing)
4 7716 NUT, HEX FLANGE, FLHTC-UC @ $0.84 = $3.36 (#7 on drawing)
4 8175 BOLT, RETAINER @ $2.84 = $11.36 (#10 on drawing)
2 27048-84 CLAMP, CANNISTER @ $2.02 = $4.04 (#11 on drawing)
2 58104-05 COMPRESSION SPRING @ $4.50 = $9.00 (#12 on drawing)
Sub-Total: $31.96
Shipping: $9.99 (UPS)
Sales Tax: $0.00
lshd1 Total: $41.95
I don't think the screws part # 2995 (#1 in drawing) will be needed for speaker pods but if they are, screws are easy enough to find.
the local dealers around here man they won't cut you any slack whatsoever on parts prices.. And they wonder why their parts departments are always dead..
Ok getting ready to order my lowers so I am revisiting this thread. I was seeing your list of parts ordered to replace what comes with the lowers. I also pulled the microfinch. Is there a reason you didn't order these....
#3
#4
#8
#13
#14
[/quote]
Last edited by UltraNutZ; 04-14-2014 at 07:05 PM. Reason: copyrighted images