2014 Harley FLHTK Twin Cooled testing & info by Fuel Moto
#41
Absolutely. My initial impression (which only consists of my ride home from the dealer) is very positive so far. Without a doubt we will have better temp control at the cylinder head
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
#42
#43
#44
Yeah I don't get it either the thread tools tab must be too hard to use.
SUBCRIBED.
SUBCRIBED.
yea, ok, whats the purpose of typing "subscribed" in a post?
never understood that myself.
Im gonna subscribe without typing subscribed.......wait, I just typed subscribed about 6 time......LOL.
I am interested in Jamies Dyna beast!
Im getting board Jamie.......got that Dyna making 150hp yet??
never understood that myself.
Im gonna subscribe without typing subscribed.......wait, I just typed subscribed about 6 time......LOL.
I am interested in Jamies Dyna beast!
Im getting board Jamie.......got that Dyna making 150hp yet??
#45
New air cleaner cover is a bit different. There appears to be more area inside the cover, the inlet faces forward and has a screen.
New AC element is different as well, it is canted at a 45 degree angle. Uses an improved breather hose assembly with dual breather hoses that join into a single hose. Surface area on the element is small
New AC element is different as well, it is canted at a 45 degree angle. Uses an improved breather hose assembly with dual breather hoses that join into a single hose. Surface area on the element is small
#49
Yes we purchased the bike from Appleton HD a very good group of folks. We will likely keep this one as we have a ton ot stuff to test with the new heads etc.. We have bought around 25 HD & metric bikes over the years for our in house R&D, including every Touring model from 2006-current except 2008 when we borrowed a bike and 2013 when there were no changes. This gives us the ability to perform our testing with no limits. We also have developed quite a few products for other manufacturers and companies behind the scenes as well.
#50