Big bore help
#1
Big bore help
I'm installing a 95" big bore on my 2001 EGC and I found a set of heads from a 103 CVO, does anyone know if these would work on my build and would I get improved air flow? I here that 1996 and above heads flow better, is this true?
Thanks
Thanks
Last edited by FL-kruzen; 04-18-2013 at 07:46 AM.
#2
Get a specific part number...I remember reading at one time that "CVO" heads were being dumped on ebay because they had a potential to fail.
in terms of flow- you can get about any result you want from having your heads worked- the key is choosing the correct spec to match your cams, exhaust, and intake fuel delivery system.
you need to match this because "hi flow" can also mean "less velocity"- which may work with one type of motor build but not another
It all depends what your desired end result is.
that would be a discussion with an experienced tuner/builder.
in terms of flow- you can get about any result you want from having your heads worked- the key is choosing the correct spec to match your cams, exhaust, and intake fuel delivery system.
you need to match this because "hi flow" can also mean "less velocity"- which may work with one type of motor build but not another
It all depends what your desired end result is.
that would be a discussion with an experienced tuner/builder.
#3
#4
#6
#7
Trending Topics
#8
#9