I would just google the part # or model name and see what you come up with. I bought mine from www.bkrider.com At the time they had a pretty good price. Im sure there are cheaper places but i am kinda limited to companies that are willing to ship via USPS Priority.

 

+1...I just received a set of 10" in black.
got a tracking number a couple hours after payment and the bars were here a couple days later as promised....

now I'm just waiting until its not 150 degrees in the garage to put them on.

 

I just finished putting my 10" LA bagger TP bars on my 2012 and they are sweet, no interference of any kind with the wires BUT did have to spend quite a bit of time rerouting all the wires & cable. The mirrors are worthless now though. Has anyone tried the Kuryakyn mirrors that are windshield mounted? I was looking at the Gloss Black Mounted Scythe Mirrors, they look real sharp, they are part #1761

 

finsihed install of 12" Twin PEaks
had to re route wiring in fairing - and delete the green TBW plug.

I did not need to replace clutch or brake - BUT I am ordering +4 on brake and +6 on clutch so I can ROUTE THEM in the original locations - NOTE PICTURES my brake lever turned down to allow factory brake line to work.... ordered new cables already..waiting for delivery. Very ahppy w/bars!

Awesome bars -
ALSO - got them from HANDLEBARLOUIE - THANKS again!

 

Best price I found was actually on amazon.

 

Ok, so my 10" Twin Peaks will be here tommorow I plan on extendending my wires but what bout the brake and clutch cab les? I have read through this entire post and it is very helpful, but does anyone have any photos on the cables and how you had to re-route them ? If it looks like a lot of trouble, I will just wait a few weeks and order a complete extension kit from La Choppers...

 

Thanks for all the info and pics guys. Looking to get the 10 inch prime apes, question though can you get the left side grip off to re-use as when I replaced my stockers I just cut em off but don't want to do that with my new one.

 

Should have called Tim at Eastern Performance. He probably could have saved you about $30 between the bars & shipping.

 

Nice bars! Next on my to do list...

 

Goggle "removing motorcycle handgrips"......Did it myself early tonight......Few pages of info on how to do it without damaging the grip(s).