Pros or Cons on the Harbor Freight Lift Table?
#1
Pros or Cons on the Harbor Freight Lift Table?
Just wanted to hear from users of the Harbor Freight Lift Table. Want to know of any issues to date with this unit.
Here's a forum photo from member HAPBOB
https://www.hdforums.com/forum/5856844-post8.html
Thanks in advance
Here's a forum photo from member HAPBOB
https://www.hdforums.com/forum/5856844-post8.html
Thanks in advance
#5
Pros
Cheap
Makes working on the bike easy
Tie down points
Seems to last ( most people that have them report good things, even the shops that use them)
Lay down pretty flat so even if you don't have much space you can always store your bike on them
Stable
Cons
Need to immediately swap over that wheel press into a real wheel chock the ones HF has are fine to add on, drill and mount
Can't convert to air unless you are magiver
(Some bitch it's not made in USA)
Some can't handle the drive on narrowness so you may need to add some wood to the sides (I don't have that problem with my SG or the wife's Fat Boy)
For the money there's better
Cheap
Makes working on the bike easy
Tie down points
Seems to last ( most people that have them report good things, even the shops that use them)
Lay down pretty flat so even if you don't have much space you can always store your bike on them
Stable
Cons
Need to immediately swap over that wheel press into a real wheel chock the ones HF has are fine to add on, drill and mount
Can't convert to air unless you are magiver
(Some bitch it's not made in USA)
Some can't handle the drive on narrowness so you may need to add some wood to the sides (I don't have that problem with my SG or the wife's Fat Boy)
For the money there's better
#6
Love mine. It is narrow going to find some old running boards or something I can fab to throw on the sides and be easily removed. One of these days lol. If I was using it for a shop where bikes were on and off a lot I would opt for air powered as cranking it up with your foot would get old. But for the money and the average garage it's great. Mine has bled down slowly a couple times for some reason other than that no problems
#7
Trending Topics
#8
#9
Just wanted to hear from users of the Harbor Freight Lift Table. Want to know of any issues to date with this unit.
Here's a forum photo from member HAPBOB
https://www.hdforums.com/forum/5856844-post8.html
Thanks in advance
Here's a forum photo from member HAPBOB
https://www.hdforums.com/forum/5856844-post8.html
Thanks in advance
is there is no way to spin the wheels freely to clean and polish them. As the one member stated they are narrow to drive on. I made 1 foot wide ramps that are exactly the same size as the table so I can have my feet down on something stable while I drive on the lift.
#10