Can anyone tell me what the stock street glide seat part number would be for 2012 or 2013. What other option should I consider for my ultra limited that I just installed the detachable trunk? I would like a sleeker looking seat.
Thanks,
Steve

 

Look on Ebay... I'm doing the same thing to my ultra and bagged a nice 2012 street glide seat for a little over $100. I might even send it down to Mean city cycles to have it narrowed and shaved down a little bit and I would still be ahead of the game than if I bought an aftermarket seat.

 

Thanks I will check it out.

 

I went with a mustang seat with a backrest, bib. Don't ride with anyone on the back. Have my street glide seat if I wanted plus I have an ultra seat if I find some worth riding on the back.

 

52320-11

 

Thanks for the part number for the 2011. I will search that number to see if I can also find the number for the 2012 and 13.

 

It's the same..

 

the 11,12,13 seat is bigger than the 09,10 seat.

the rear pass section is all poofed up.

here's my EG Classic with the T/P off and 09 SG seat:



also using SG pass pegs on it.

before you buy a seat, take your off and make sure that the fender isn't damaged from the stock seat.

on my bike I have rubber bumpers on top of the frame rails to hold the seat up off of the fender, and have also shaved the plastic ribs about .125"

mike

 

srawden, i don't like just about any stock harley seats. but when the seat on my 08 streetglide really sucked, i got a seat from an 09 roadglide. it has a wonderful bucket to sit in, and it doesn't look dorky at all. for a stock harley seat, it was the most comfortable i've found. recently i went to the harley dealership and bought a new 09 roadglide seat for my newly acquired 2013 roadglide ultra. the stock seat on my new bike was cushy, but after about an hour, i felt as if i was sitting on the seat pan. the 09 roadglide stitching even flows with the tank consoles on our new bikes, and the foam is somewhat similar as how people describe the corbin seats. hard, but they break in to fit you, and that's exactly what happened for me, and after a few rides, it fits me and is very comfortable. 700+ miles per day=no problem. cost was right at $250 for a new one through harley, and they can still get them new.

 

That's good to know about the road glide seat. I do have the sun downer from harley on it now, but just a little bit big for me with the tour pak removed. Any chance that you might have the part number for that seat? Also would you have a picture of your bike with that seat?
Thanks for out help!
Steve