Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Just ordered the Power vision from Fuel Moto

Thread Tools
 
Search this Thread
 
  #11  
Old 11-26-2012 | 10:12 PM
hattitude's Avatar
hattitude
Seasoned HDF Member
Joined: Sep 2008
Posts: 11,883
Likes: 8,400
From: San Diego, CA
Default

Originally Posted by Jswerve
I had been searching for a cpl weeks for the Ruby Red CVO SG and one pops up on the internet late one evening. The next day I call when the doors open at 9am and put a deposit down. I get home that night and look up the route on the map that I am going to drive and a light comes on, hey that's the place we stopped at and got rained on! Small world lmao
I was very impressed with Workman.

I was riding from Rochester,NY to San Diego,CA. Just before leaving Rochester, the word came out about the voltage regulator fix, but dealers didn't have the replacement kits yet. Per the service bulletin, my regulator had one of the affected serial numbers.

I headed West wondering if I could find a dealer with the replacement before I broke down. I had stopped at four dealers and none had the kits yet, one didn't even know about the service bulletin.

Cruising through Illinois, in the middle of nowhere (I thought) I got off an exit to get fuel. Just before I reached the fuel stations, there was this big harley dealer, Workman HD.

I was ahead of schedule and stopped in. They had received the kits that morning. They knew I was just passing through town, and yet they had me out of there in just a tad over an hour with a new voltage regulator. They even apologized for the delay because when I came in the mechanic had just left for lunch....

They were great people, I'll be surprised if your purchase isn't an excellent experience......!
 
  #12  
Old 11-26-2012 | 10:21 PM
Jswerve's Avatar
Jswerve
Thread Starter
|
Outstanding HDF Member
Joined: May 2008
Posts: 3,078
Likes: 0
From: Iowa
Default

Originally Posted by hattitude
I was very impressed with Workman.

I was riding from Rochester,NY to San Diego,CA. Just before leaving Rochester, the word came out about the voltage regulator fix, but dealers didn't have the replacement kits yet. Per the service bulletin, my regulator had one of the affected serial numbers.

I headed West wondering if I could find a dealer with the replacement before I broke down. I had stopped at four dealers and none had the kits yet, one didn't even know about the service bulletin.

Cruising through Illinois, in the middle of nowhere (I thought) I got off an exit to get fuel. Just before I reached the fuel stations, there was this big harley dealer, Workman HD.

I was ahead of schedule and stopped in. They had received the kits that morning. They knew I was just passing through town, and yet they had me out of there in just a tad over an hour with a new voltage regulator. They even apologized for the delay because when I came in the mechanic had just left for lunch....

They were great people, I'll be surprised if your purchase isn't an excellent experience......!
 
  #13  
Old 11-28-2012 | 11:42 AM
spizzyman's Avatar
spizzyman
Road Master
Joined: Jun 2007
Posts: 958
Likes: 1
From: Birch Bay, WA
Default

Are you folks mounting it to the bars or just setting and putting away?
 
  #14  
Old 11-28-2012 | 11:45 AM
shooter5074's Avatar
shooter5074
Outstanding HDF Member
Joined: Jan 2011
Posts: 2,590
Likes: 30
From: Western Illinois, land of bad roads, and corrupt politicians
Default

Originally Posted by spizzyman
Are you folks mounting it to the bars or just setting and putting away?

I initially programmed the bike and put the PV in my tool box. But after playing with the data readout gauges, I'm going to mount it on the bike.
 
  #15  
Old 11-28-2012 | 11:52 AM
Jswerve's Avatar
Jswerve
Thread Starter
|
Outstanding HDF Member
Joined: May 2008
Posts: 3,078
Likes: 0
From: Iowa
Default

Originally Posted by spizzyman
Are you folks mounting it to the bars or just setting and putting away?
Set it and forget it for now but maybe mount come spring
 
  #16  
Old 11-28-2012 | 12:06 PM
mgmmgm's Avatar
mgmmgm
Outstanding HDF Member
Joined: Feb 2007
Posts: 2,711
Likes: 6
From: Spokane, WA.
Default

I had my PV mounted on the bars so I could have the tach up and other gauges, I need to mess with it today so I can figure out how to get the gauges to appear.

Probably going to be a ccccccoooooollllldddddd ride today.
 
  #17  
Old 11-28-2012 | 12:09 PM
shooter5074's Avatar
shooter5074
Outstanding HDF Member
Joined: Jan 2011
Posts: 2,590
Likes: 30
From: Western Illinois, land of bad roads, and corrupt politicians
Default

Originally Posted by mgmmgm
I had my PV mounted on the bars so I could have the tach up and other gauges, I need to mess with it today so I can figure out how to get the gauges to appear.

Probably going to be a ccccccoooooollllldddddd ride today.
datalog, then gauges
 
  #18  
Old 11-28-2012 | 12:37 PM
Reaper22's Avatar
Reaper22
Road Captain
Joined: May 2011
Posts: 565
Likes: 2
From: Palmyra Missouri
Default

I love my PV, I have mine mounted cuz I can monitor enging temp volts fuel economy and much much more. And the service that Fuel Moto delivers is bar none..I bought their stainless header pipe, 4.5 Jackpot pro mufflers, air breather and the power vision and very pleased....
BTW Where is Workman Harley located? Somehow I came up with a keychain with their logo and I have never been there, your in western Il. and I'm in middle to north east Missouri.....
61 degrees tomorrow, I'm riding....:}
 

Last edited by Reaper22; 11-28-2012 at 12:40 PM.
  #19  
Old 11-28-2012 | 12:40 PM
shooter5074's Avatar
shooter5074
Outstanding HDF Member
Joined: Jan 2011
Posts: 2,590
Likes: 30
From: Western Illinois, land of bad roads, and corrupt politicians
Default

Originally Posted by Reaper22
I love my PV, I have mine mounted cuz I can monitor enging temp volts fuel economy and much much more. And the service that Fuel Moto delivers is bar none..I bought their stainless header pipe, 4.5 Jackpot pro mufflers, air breather and the power vision and very pleased....
BTW Where is Workman Harley located? Somehow I came up with a keychain with there logo and I have never been there, your in western Il. and I'm in middle to north east Missouri.....
Rockfalls, il http://www.workman-hd.com/
 
  #20  
Old 11-28-2012 | 01:21 PM
spizzyman's Avatar
spizzyman
Road Master
Joined: Jun 2007
Posts: 958
Likes: 1
From: Birch Bay, WA
Default

Have to decide if I will keep the stock head pipe or spring for the new one. I am sold on the PV.
 


Quick Reply: Just ordered the Power vision from Fuel Moto



All times are GMT -5. The time now is 02:18 AM.