J&M Rokker speakers
#1
#3
CHB ,,,,,,
what are you using for a music source thru the Harley HK radio ? ,,,,,
what are you using for a music source thru the Harley HK radio ? ,,,,,
__________________
JMJOHN,,,, www.Jmcorp.com ,,,, send email direct to John@Jmcorp.com for your HD-Forums VIP Discount Promo Code.
JMJOHN,,,, www.Jmcorp.com ,,,, send email direct to John@Jmcorp.com for your HD-Forums VIP Discount Promo Code.
#5
#7
I have those speakers and i noticed the same thing really after half volue.
Now ! put in the Rockford Fosgate Amp. No more distortion at any volume I can handle.
Plenty of clear volume at highway speeds. As a mater of fact I'll probably turn the amp gain DOWN a half notch next time I have the bike open.
Now ! put in the Rockford Fosgate Amp. No more distortion at any volume I can handle.
Plenty of clear volume at highway speeds. As a mater of fact I'll probably turn the amp gain DOWN a half notch next time I have the bike open.
Trending Topics
#10
For those who have distorted loud volumes have you adjusted the equalizers? Did you do it at high volume levels like riding?
If you put the volume up high when riding that's where it needs to have the EQ adjusted. I've seen many listen at low volumes at one tone setting and when loud a different setting works better. Adjust the EQ at the highest volume to make the speakers sound their best at the loudness you listen to it at.
The reason power amps work the best is because you can turn down the main unit limiting the distortion. Then the amp takes that cleaner signal and makes it louder.
Again if the EQ is setup for the loudest volume, and the main unit kept turned down to drive the amp you can improve the sound dramatically with the EQ. It's better turning down the main unit and adding more boost on the power amp.
If you put the volume up high when riding that's where it needs to have the EQ adjusted. I've seen many listen at low volumes at one tone setting and when loud a different setting works better. Adjust the EQ at the highest volume to make the speakers sound their best at the loudness you listen to it at.
The reason power amps work the best is because you can turn down the main unit limiting the distortion. Then the amp takes that cleaner signal and makes it louder.
Again if the EQ is setup for the loudest volume, and the main unit kept turned down to drive the amp you can improve the sound dramatically with the EQ. It's better turning down the main unit and adding more boost on the power amp.