Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

How much work to swap motor?

Thread Tools
 
Search this Thread
 
  #1  
Old 09-01-2012 | 02:49 PM
cruzmisl's Avatar
cruzmisl
Thread Starter
|
Road Master
Joined: Jun 2010
Posts: 757
Likes: 4
Default How much work to swap motor?

Hi All,
I was curious how much work is required to swap the motor in a road king. Juddy don't want to get in over my head.
Thanks,
J.
 
  #2  
Old 09-01-2012 | 02:59 PM
BrownSanta's Avatar
BrownSanta
Road Warrior
Joined: Dec 2010
Posts: 1,699
Likes: 7
From: New Jersey
Default

Subscribed
 
  #3  
Old 09-01-2012 | 03:38 PM
mkguitar's Avatar
mkguitar
Extreme HDF Member
Joined: Sep 2010
Posts: 14,744
Likes: 398
From: Phoenix '53, '88, '09 Big Twins
Default

assuming that the efi and electronics are the same...

the mechanical part would be floor boards, inner/outer primary and primary drive, clutch, exhaust,

motor mounts and the bolts from tranny to motor

pull the motor out the right side.

not sure what a twin cam weighs, an evo weighs about 130 pounds-

mike
 
  #4  
Old 09-01-2012 | 04:47 PM
feguy1's Avatar
feguy1
Tourer
Joined: Jun 2009
Posts: 388
Likes: 12
From: Richmond, Virginia
Default

Not a big deal. Once you get the pipes out of the way, its all good.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
extremeshot
Engine Mechanical Topics
40
05-07-2016 10:57 AM
20"ape
Touring Models
8
10-17-2014 01:43 PM
br549A1
EVO
20
10-13-2014 10:05 PM
upland117
EVO
4
07-14-2014 09:30 PM
upland117
EVO
0
07-14-2014 03:04 PM



Quick Reply: How much work to swap motor?



All times are GMT -5. The time now is 02:17 PM.