Originally Posted by Gary H

I just went through the limp mode problems on my 2012. Fought it for a couple months, but my limp mode didn't get as bad as yours. I could get up to highway speeds, but taking off, it felt like I had half throttle. I chased wires, ran voltage, found the culprit wire, but couldn't find the root cause. Ended up taking the bars off, looking for a bare wire. Nothing! Finally found it. The stupid grey plug going from the TBW sensor wouldn't stay plugged in the way it should. I ended up cutting the plug out and hard soldering it, Lots of heat shrink, reinstalled, and running great! One of the biggest issues with these things I've found is that little plug about 8" from your TBW sensor on your right bar side. I can believe Harley did this. On the SE models, it's not there. It's one of the few parts for the SE that actually costs less than the standard version and is better!

Originally Posted by JCleary

Nice Sig Pic!! I wore my floorboards to a knife-edge on that road! Skyline to Boulder Creek and back is my crack! Had to replace the boards and re-powder the mounts before I sold the bike LOL.

Sorry about the off-subject post.