PLATINUM AIR...JACKPOT
#12
RE: PLATINUM AIR...JACKPOT
Is it possble to buy just the shocks and not the entire system. I have the DB system and feel that the compressor and valve are fine so if I could save a litte money by buying just the shocks I would give it some consideration. On the same note does anyone know if it is possible to do the same with other companies like Progressive?
#13
#15
RE: PLATINUM AIR...JACKPOT
yes you can,they ain cheap cause PA wants you to do the whole system...i thought the same til i saw the PA stuff...comp was slightly larger, looked as tho the piston assembly part of it was higher quality...and the valves themselve were head and shoulders better than DB...it also has a complete harness done like a harness, not some cheesy wires and plastic connectors....this is very nice, no comparison to DB...i opted to just do the whole kit rather than cob one together(DB kit only provides for air in one chamber)...the bleed and feed has two chambers in each shock...so the DB crap wont even power it fully
ORIGINAL: bdjhog
Is it possble to buy just the shocks and not the entire system. I have the DB system and feel that the compressor and valve are fine so if I could save a litte money by buying just the shocks I would give it some consideration. On the same note does anyone know if it is possible to do the same with other companies like Progressive?
Is it possble to buy just the shocks and not the entire system. I have the DB system and feel that the compressor and valve are fine so if I could save a litte money by buying just the shocks I would give it some consideration. On the same note does anyone know if it is possible to do the same with other companies like Progressive?
#16
RE: PLATINUM AIR...JACKPOT
The reason I just needed the shocks was because I never used the DB setup to begin with, and purchased all my parts seperately (like my Viair compressor from Arnott industries, and Swagelok fittings), and made all my own electrical harnesses I was way ahead of the DB system, and still ahead of the parts I saw listed in the Platinum air parts. I also machined my own switch housing that is mounted into my left hand turn signal housing, so my up/down switch is always at thumbs reach.
But, that fact still remains, the Platinum Air setup is just plain AWESOME!
Glenn
But, that fact still remains, the Platinum Air setup is just plain AWESOME!
Glenn
#17