Nice.. Thank you. I agree that the visor style does look better..

 

[quote=HDSledge;10027192]The visor style works, I have one.


Question: Only have one location left with regular bulbs in the front turn signals. Kuryakyn Panacea on back. Does anyone know if I will need an additional load equalizer to convert the front turn signals to led?

No you only require the equalizer on the rear turn signals.

I also use the visor as mentioned and it works just fine.

 

If you read the instructions from HD they say to remove fairing and locate the connection. I can tell you, you won't find the connection doing it this way.

You don't have to remove the fairing. Turn your handle bars all the way to the left and look up under your accessory and cruise control power switches. You will see a connector. Using one or two fingers work that connector down and out from underneath. Once you have it clear unconnect it and install the new connection matching up the male/female connectors. Once you have the connections made push the connectoion blocks and wire nest back up under the switch cover housing and you're done.

 

[quote=Nute;10186649]Thanks Nute! Guess I'll go with the panacea ones since I have them in the tail lights.

 

Any difference between a Truck-lite packaged headlight and a Kury one?

 

I'd like to install the phase 7 LED headlamp on my FLHTK. But I am still confused with the headlight ring -- I have the headlamp visor (67752-77T) on my stock headlamp. If I install the Phase 7, and need the french ring, will that visor fit with the french ring?? Thanks for any advice.

 

Any idea how long this type of headlight is supposed to last?

 

It should fit since the lip of the trim ring rests on the edge of the bulb and the visors go under that.

 

They are the exact same, TL makes them for Kury.

 

67752-77T CLASSIC CHROME HEADLAMP VISORS Fits 7 Headlamp. Use Installation Kit P/N 67761-96. (Does not fit with Headlamp Trim Ring P/Ns 69626-99 and 69627-99.) 67752-77T Classic Chrome.

According to that this part won't go on with the trim rings..