Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Tour pack removal guys - in here please

Thread Tools
 
Search this Thread
 
  #1  
Old 04-21-2012 | 08:09 AM
EnglishAdam's Avatar
EnglishAdam
Thread Starter
|
Tourer
Joined: Jun 2011
Posts: 468
Likes: 4
From: Houston Tx
Default Tour pack removal guys - in here please

I'm going to remove my tour pack from my Ultra Classic and have read all the threads on fitting the Deutsch connectors so that the lights can be disconnected.

I was weighing the job up and noticed that I already have these plugs fitted, one on each side.



There's nothing for the antenna or CB which as far as I can see will roll up under the seat so my question is, am I halfway there already and can I just unbolt the tour pack and go or are these plugs something else and I've had a brain fart?
 
  #2  
Old 04-21-2012 | 08:23 AM
hog95023's Avatar
hog95023
Elite HDF Member
Joined: Apr 2009
Posts: 3,542
Likes: 161
From: Booming metropolis
Default

The antenna and cb cabels shouldnt have a disconnect like that or they wouldn't work very well so I think you are correct.
 
  #3  
Old 04-21-2012 | 12:01 PM
EnglishAdam's Avatar
EnglishAdam
Thread Starter
|
Tourer
Joined: Jun 2011
Posts: 468
Likes: 4
From: Houston Tx
Default

Thanks for the reply.

Ok, had 141 views so far. Any of you actually removed a tour pack?

I wouldn't mind a 2nd or 3rd opinion from somebody who's done this.

Thanks in advance team.
 
  #4  
Old 04-21-2012 | 12:11 PM
nvsteve's Avatar
nvsteve
Ultimate HDF Member
Joined: Oct 2006
Posts: 5,977
Likes: 78
From: Nevada
Default

Originally Posted by EnglishAdam
Thanks for the reply.

Ok, had 141 views so far. Any of you actually removed a tour pack?

I wouldn't mind a 2nd or 3rd opinion from somebody who's done this.

Thanks in advance team.
I took the tourpak off my 07 Ultra and made in quick detach. I did use the antenna mount that came with the kit. All the other cables/wiring easily tucked under the seat.
 
The following users liked this post:
2slow05 (07-20-2019)
  #5  
Old 04-21-2012 | 12:16 PM
mkguitar's Avatar
mkguitar
Extreme HDF Member
Joined: Sep 2010
Posts: 14,744
Likes: 398
From: Phoenix '53, '88, '09 Big Twins
Default

removing the tour pak is common, many use the H-D detachable kit.

a bolt/on, bolt off method is pretty easy too, take 30 minutes for the conversion...

but for the wiring.

I relocated my antenna with the kit in the detach kit, mounting off the inner saddlebag rail is fairly easy.

for the lighting, I did my own custom harness from the seat back as I wanted to add some things.

It's pretty straight forward once you look at it all.

Mike
 
  #6  
Old 04-21-2012 | 12:25 PM
hog95023's Avatar
hog95023
Elite HDF Member
Joined: Apr 2009
Posts: 3,542
Likes: 161
From: Booming metropolis
Default

He wants to know if the plug pictured is part of disconnect kit. And may already be installed on his bike
 
  #7  
Old 04-21-2012 | 12:52 PM
bdp's Avatar
bdp
Outstanding HDF Member
Joined: Jun 2008
Posts: 2,134
Likes: 4
From: Third Coast, South Texas
Default

That looks like the plug thats normally up inside the speaker pod.. The purpose of another deustch connector closer to the battery is to eliminate about 18 to 24 inch of wire to each speaker.. Less wire to deal with and curl up under the seat when tour pak is off.
 
  #8  
Old 04-21-2012 | 01:17 PM
EnglishAdam's Avatar
EnglishAdam
Thread Starter
|
Tourer
Joined: Jun 2011
Posts: 468
Likes: 4
From: Houston Tx
Default

Thanks for the replies.

It looks like the plugs are pretty close to the seat so I think I am good to go.

I'll give it a try and see what happens. For the amount of time that I actually need the tour pack, I'll just unbolt it and forgo the quick disconnect pack.

Time for a new seat.
 
  #9  
Old 04-21-2012 | 02:09 PM
OrdieSeniorChief's Avatar
OrdieSeniorChief
Intermediate
Joined: Jun 2011
Posts: 27
Likes: 0
From: Lake Cobbosseecontee, Maine
Default

I left mine stock, just unplug everything and roll it up under the seat. I did reroute the antenna wire to a bracket mounted behind the left saddle bag.
 
Attached Thumbnails Tour pack removal guys - in here please-small-pix.jpg  
  #10  
Old 04-21-2012 | 02:17 PM
badcat222's Avatar
badcat222
Cruiser
Joined: Jan 2011
Posts: 107
Likes: 0
From: Austin, TX
Default

Hey EnglishAdam, what year model is your Scoot. I put the detach kit on my 09 Ultra. On mine, you have to unplug the speakers at the speaker, and pull the antenna wires through the grommets, and unplug the brakelights under the tourpak liner. If their is an easier way I would love to know about it.
 


Quick Reply: Tour pack removal guys - in here please



All times are GMT -5. The time now is 05:25 PM.