I put a jack under it just to get the bike level. Then just fill the oil till it just barely touches the bottom of the clutch pack. On my 2010 it's about 1 and 1/2 quarts or so.
I would question this, that is if you're just doing a service change.
I would question this, that is if you're just doing a service change.
+1 on that....I use one full container of the HD Formula + and just a very small amount from another container until I can see the oil at the bottom of the clutch basket. As long as you can see the fluid in the case, your good to go. Overfill and your finding neutral issues will double. My experience, yours may differ....