tire mount/balance question
#11
Ever try reusing wheel weights...lol
#12
Dyna beads are reusable and there are other brands that are cheaper. Weights have been around forever and they have their problems too. It probably doesn't matter which method you use.
I don't think it is uncommon to see 3 ounces of weights on a Harley wheel. Maybe they are just not made very well but I've seen it a lot over the years.
I don't think it is uncommon to see 3 ounces of weights on a Harley wheel. Maybe they are just not made very well but I've seen it a lot over the years.
#13
The only weights on my wheels right now are the glue pads that were on the bottom of the lead because the lead fell off. I don't see any cupping or have vibration through 95 MPH so I guess I won't F with it for now. New rear tire going on in a month and can't decide on the Dyna beads or lead. I didn't know DB voided the tire warranty. DB doesn't tell you that in their adds. The ball bearing balancer is out because it is Fugly and way too expensive.
#14
3 ounces of weight is acceptable on bagger tires. I have used as much before and it did not matter how I moved the freaking tire on the rim. On the other hand some times I have gotten by with 1/4 ounce on the same brand tire (Dunlop). Here is a little trick to try some times. put 5000 miles on your tire and check the balance again. It will be completely off.
#15
#16
#17
I agree with about everything said here. I didn't know that Dyna beads were reusable. I would like to try them someday, old habits are hard to break and lead weights are old school. I have every reason to believe that Dyna beads work as advertised.
There is a school of thought out there that claims that balancing a motorcycle tire is all overkill. The theory goes that the gyroscopic action of a motorcycle precludes any need to balance a tire on a two wheeled vehicle. I don't know if I buy it or not, but the poster that said his weights fell off and his tires still look great would seem to add some validity to that train of thought.
There is a school of thought out there that claims that balancing a motorcycle tire is all overkill. The theory goes that the gyroscopic action of a motorcycle precludes any need to balance a tire on a two wheeled vehicle. I don't know if I buy it or not, but the poster that said his weights fell off and his tires still look great would seem to add some validity to that train of thought.
#18
The Deuce rear wheel has ridges that run from the rim edge inward towards the center of the wheel. When I had my rear tire replaced last summer, the indy did a nice job of balancing it, using four 1/4 ounce weights. One day I was working in the garage, about 5 feet from the bike, and I heard a 'ting'. Couldn't figure out what the noise was. A couple of days later I was sweeping the floor and found a wheel weight laying right where the rear wheel always sits in the garage. Yep, the weight just fell off while the bike was sitting there. I never noticed any vibration in those two days that the weight was missing. Stopped by the indy and had him put a new weight on. A week later I'm sitting on the floor next to the bike doing a basic nut and bolt check when I hear 'ting'. Yep, another weight just fell off. Turns out that the weights were square, very much like the weights in the OP picture and weren't making full contact between the wheel ridges. A quick trip to the local auto parts guy, a quick spray with rattle can chrome paint, and the new weights are still there.
whew! Kind of long, sorry guys.
whew! Kind of long, sorry guys.
#19
I myself would not be pleased. Thats nasty lookin'. My Buell has Pirelli Dragons with no weights. When I talked to the dealer that mounted them, he said that was normal for those tires. They run smooth so he was correct. I run the bike up to 130 mph with no issues.
Last edited by Harleyboyddk; 03-10-2012 at 10:05 PM.
#20
I wouldn't go back to that guy!
It's just me of course, but I change tires by myself.